Bilde av Markeset, Tore
Bilde av Markeset, Tore
Professor II - Maskiningeniør (Drift og Vedlikeholdsstyring) Institutt for teknologi og sikkerhet tore.markeset@uit.no

Tore Markeset



  • Sakura Attanayake, Chandima RATNAYAKE MUDIYANSELAGE, Tore Markeset :
    Functional Failure Criticality Assessment and Control of Power Distribution Systems: Failure Prioritization Using AHP
    IEEE Access 2024 DOI
  • Guicang Peng, Jon Tømmerås Selvik, Eirik Bjorheim Abrahamsen, Knut Erik Bang, Tore Markeset :
    Integrating structure time series forecasting and multicriteria decision analysis for adaptive operational risk assessment: an empirical study using real-time data
    International Journal of System Assurance Engineering and Management 2024 DOI
  • Mayang Kusumawardhani, Magnus Soon Arnhus, Tore Markeset :
    Building a sustainable life cycle cost efficiency model
    2022 DOI
  • Mayang Kusumawardhani, Jan-Viggo Johansen, Tore Markeset :
    Strategic roadmap for digitalized asset lifecycle management
    2022 DOI
  • Albara M. Mustafa, Abbas Barabadi, Tore Markeset, Masoud Naseri :
    An overall performance index for wind farms: a case study in Norway Arctic region
    International Journal of System Assurance Engineering and Management 2021 ARKIV / DOI
  • Guicang Peng, Songpu Ai, Li Zhang, Rong Chunming, Tore Markeset :
    Equipment Life Cycle Management Based on Private Blockchain and Smart Contract
    Springer 2020 DOI
  • Guicang Peng, Tore Markeset :
    Dynamic Maintenance Scheduling Based on Cost Analysis and Genetic Algorithm for Offshore Facilities
    Springer 2020 DOI
  • Guicang Peng, Knut Erik Bang, Tore Markeset :
    Identifying challenges for major accident prevention in onshore drilling operations : A case study from a middle east oilfield
    Research Publishing Services 2020 FULLTEKST
  • Albara Mustafa, Tore Markeset, Abbas Barabadi :
    Downtime cost estimation: A wind farm in the Arctic case study
    Research Publishing Services 2020 FULLTEKST
  • Albara Mustafa, Tore Markeset, Abbas Barabadi :
    Wind turbine failures review and gearbox condition monitoring
    Research Publishing Services 2020 FULLTEKST
  • Mayang Kusumawardhani, Tore Markeset :
    Calculating the initial spare parts inventory in petroleum projects with cost-benefit analysis
    Society of Petroleum Engineers 2020 DOI
  • Mayang Kusumawardhani, Tore Markeset, Rajesh Kumar :
    Accelerating petroleum project delivery through a lean operational readiness structure
    Society of Petroleum Engineers 2020 DOI
  • Albara Mustafa, Abbas Barabadi, Tore Markeset :
    Risk assessment of wind farm development in ice proven area
    Proceedings - International Conference on Port and Ocean Engineering under Arctic Conditions 2019 ARKIV / FULLTEKST
  • Mayang Kusumawardhani, Tore Markeset, Rajesh Kumar :
    Development of strategic asset management planning in the petroleum industry
    Journal of Quality in Maintenance Engineering 2017 ARKIV / DOI
  • Mayang Kusumawardhani, Ståle Gundersen, Tore Markeset :
    Mapping the research approach of asset management studies in the petroleum industry
    Journal of Quality in Maintenance Engineering 2017 DOI
  • Javad Barabady, Xueli Gao, Tore Markeset :
    Criticality Analysis from Maintainability Point of View
    IEEE (Institute of Electrical and Electronics Engineers) 2017
  • Mayang Kusumawardhani, Rajesh Kumar, Tore Markeset :
    Asset integrity management: Offshore installations challenges
    Journal of Quality in Maintenance Engineering 2016 DOI
  • Rupesh Kumar, Theorell Töres, Tore Markeset :
    Comparing psychosocial factors associated with job stress among administrative staff and cleaners
    Advances in Intelligent Systems and Computing 2016 DOI
  • Anecito Reyes Balindres, Rupesh Kumar, Tore Markeset :
    Effects of arctic conditions on human performance
    Advances in Intelligent Systems and Computing 2016 DOI
  • Tore Markeset, Anette Cecilie Sæland, Ove Tobias Gudmestad, Javad Barabady :
    Petroleum Production facilities in Arctic operational environments
    Routledge 2015 DOI
  • Ove Tobias Gudmestad, Tore Markeset :
    Oil and Gas Operations under Extreme Conditions in the Cold North
    International Journal of Computational Methods & Experimental Measurements 2015 DOI
  • Mayang Kusumawardhani, Tore Markeset :
    Asset Integrity Knowledge Management: A Case Study from the Petroleum Industry
    Operations and Supply Chain Management 2015 FULLTEKST / DOI
  • Efosa Emmanuel Uyiomendo, Tore Markeset :
    Subsea maintenance service delivery: A multi-variable analysis model for predicting potential delays in scheduled services
    Journal of Quality in Maintenance Engineering 2015 DOI
  • Mayang Kusumawardhani, Tore Markeset :
    Information System Challenges in Managing Asset Integrity of Petroleum Production Facility
    Proceeding International Conference on Operations and Supply Chain Management (OSCM) 2014
  • Maneesh Singh, Tore Markeset, Uday Kumar :
    Some philosophical issues in modeling corrosion of oil and gas pipelines
    International Journal of System Assurance Engineering and Management 2014 DOI
  • Maneesh Singh, Tore Markeset :
    Simultaneous handling of variability and uncertainty in probabilistic and possibilistic failure analysis of corroded pipes
    International Journal of System Assurance Engineering and Management 2014 DOI
  • Abbas Barabadi, Javad Barabady, Tore Markeset :
    Application of reliability models with covariates in spare part prediction and optimization - A case study
    Reliability Engineering & System Safety 2014 DOI
  • Maneesh Singh, Tore Markeset :
    Hybrid models for handling variability and uncertainty in probabilistic and possibilistic failure analysis of corroded pipes
    Engineering Failure Analysis 2014 DOI
  • Mayang Kusumawardhani, Tore Markeset :
    Sourcing Strategy for Maintenance Support Services in Petroleum Production Facilities
    Proceeding International Conference on Operations and Supply Chain Management (OSCM) 2014
  • Mayang Kusumawardhani, Tore Markeset :
    Asset Integrity of Deepwater Petroleum Production Facilities
    2014 FULLTEKST / DOI
  • Mayang Kusumawardhani, Tore Markeset :
    Research Design for Industrial Service Studies
    Proceeding International Conference on Operations and Supply Chain Management (OSCM) 2014
  • Mayang Kusumawardhani, Tore Markeset :
    Asset integrity of deepwater petroleum production facilities
    IEEE International Conference on Industrial Engineering and Engineering Management 2014 DOI
  • Jorge Trejo, Enrique Heras, Tore Markeset :
    Using the HAZOP Analysis in the Maintenance, Modifications and Installation of Subsea Petroleum Production Systems
    IEEE conference proceedings 2013 DOI
  • Hermanto Ang, Tore Markeset, Tor Ole Bang-Steinsvik :
    Condition Monitoring and Identification of Failure Modes of Subsea Electrical Equipments
    IEEE conference proceedings 2013 DOI
  • Yonas Zewdu Ayele, Abbas Barabadi, Tore Markeset :
    Spare Part Transportation Management in the High North
    Proceedings - International Conference on Port and Ocean Engineering under Arctic Conditions 2013 ARKIV
  • Maneesh Singh, Tore Markeset :
    Handling of variability in probabilistic and possibilistic failure analysis of corroded pipes
    International Journal of System Assurance Engineering and Management 2013 DOI
  • Tore Markeset, Jorge Trejo, Rajesh Kumar :
    Maintenance of subsea petroleum production systems: a case study
    Journal of Quality in Maintenance Engineering 2013 DOI
  • Abbas Barabadi, Behzad Ghodrati, Javad Barabady, Tore Markeset :
    Reliability and Spare Parts Estimation Taking into Consideration the Operational Environment - A Case Study
    IEEE Press 2012
  • Albara Mustafa, Abbas Barabadi, Tore Markeset :
    Downtime Cost Estimation: A Wind Farm in the Arctic Case Study
    2020
  • Albara Mustafa, Abbas Barabadi, Tore Markeset :
    Wind Turbine Failures Review and Gearbox Condition Monitoring
    2020
  • Guicang Peng, Songpu Ai, Li Zhang, Rong Chunming, Tore Markeset :
    Equipment Life Cycle Management Based on Private Blockchain and Smart Contract
    2018
  • Knut Erik Bang, Tore Markeset :
    Towards A New Type Of Company: Changes In Company Assets And Core Activities And In Asset Management
    2016 FULLTEKST
  • Knut Erik Bang, Tore Markeset :
    Measuring Changes In Outsourcing: A Case Study
    2016 FULLTEKST
  • Knut Erik Bang, Tore Markeset :
    The Oncoming Waves Of Competition
    2016 FULLTEKST
  • Jorge Moreno-Trejo, Tore Markeset :
    Power Distribution in Subsea Developments: a System Engineering Perspective
    2014 FULLTEKST
  • Nii Nortey Basil Clarence Lokko, Jawad Raza, Tore Markeset, Sukhvir Singh Panesar :
    Exploring the condition-based maintenance opportunities for production-critical assets
    2014
  • Nii Nortey Basil Clarence Lokko, Jawad Raza, Tore Markeset, Sukhvir Singh Panesar :
    Practical challenges in determining periodic maintenance intervals on the Norwegian Continental Shelf (NCS): Some expert views and opinions
    2014
  • Nii Nortey Basil Clarence Lokko, Jawad Raza, Tore Markeset, Sukhvir Singh Panesar :
    Exploring the condition-based maintenance opportunities for production-critical assets
    2014 DOI
  • Nii Nortey Basil Clarence Lokko, Jawad Raza, Tore Markeset, Sukhvir Singh Panesar :
    Practical challenges in determining periodic maintenance intervals on the Norwegian Continental Shelf (NCS): Some expert views and opinions
    2014 DOI
  • Ove Tobias Gudmestad, Tore Markeset :
    Norway's Oil Industry Working in Extreme Conditions
    23. november 2012 FULLTEKST

  • De 50 siste resultatene fra Cristin vises på siden. Se alle arbeider i Cristin her →

    Publikasjoner utenom Cristin

    Papers in international peer reviewed journals

    Kusumawardhani, M., Kumar, R and Markeset, T (2019), Establishing operational readiness and assurance for petroleum project, Accepted for publication in Journal of Quality in Maintenance Engineering 
    Ramrattan, H., Markeset, T. and Syan, C.S. (2019), Sustaining Asset Integrity in the Trinidad and Tobago’s Energy Sector: An Assessment, West Indian Journal of Engineering, ISSN 0511-5728, Vol.42, No.1, July 2019, pp.12-21
    Kusumawardhani, M., Gundersen, S. and Markeset, T (2017). Mapping the research approach of asset management studies in the petroleum industry, Journal of Quality in Maintenance Engineering, Vol 23, Issue 1, pp. 57-70, doi: 10.1108/JQME-07-2015-0031
    Kusumawardhani, M., Kumar, R and Markeset, T (2016), Development of strategic asset integrity planning in the petroleum industry, Journal of Quality in Maintenance Engineering, Vol. 23 Issue: 2, pp.165-179, doi: 10.1108/JQME-04-2016-0016
    Kusumawardhani, M., Kumar, R and Markeset, T (2016), Asset integrity management: offshore installations challenges, Journal of Quality in Maintenance Engineering, Volume 22 Issue 3, pp. 238 - 251, doi: 10.1108/JQME-06-2015-0023, (Highly commended paper for the Outstanding Paper award, in the 2017 Emerald Literati Network Awards for Excellence), http://www.emeraldgrouppublishing.com/authors/literati/awards.htm?year=2017&journal=jqme 
    Gudmestad, O.T. and Markeset, T. (2015), Oil and gas operations under extreme conditions in the cold north, International Journal of Computational Methods and Experimental Measurements, Volume 3, Issue 1, WIT Press, Southampton
    Kusumawardhani, M, and Markeset, T (2015 ), Asset integrity knowledge management: a case study from the petroleum industry, Operations and Supply Chain Management: An International Journal, Vol 8, Issue 3, pp 146-153
    Uyiomendo, E.E. and Markeset, T. (2015), Subsea maintenance service delivery: a multi-variable analysis model for predicting potential delays in scheduled services, Journal of Quality in Maintenance Engineering, Vol 21, Issue 1, pp. 34-54 (winner of the Outstanding Paper award in the 2016 Emerald Literati Network Awards for Excellence, http://www.emeraldgrouppublishing.com/authors/literati/awards.htm?year=2016)
    Markeset, T, Sæland, A.C., Gudmestad, O.T. and Barabady, J. (2015), [Book Chapter] Petroleum production facilities in Arctic operational environments, In: Bourmistrov, A., Mellemvik, F., Bambulyak, A., Gudmestad, O. T., Overland, I., Zolotukhin, A. (Eds.), International Cooperation and Arctic Petroleum: Barents Sea Scenarios
    Singh, M. and Markeset, T. (2014), Handling of variability in probabilistic and possibilistic failure analysis of corroded pipes, DOI 10.1007/s13198-013-0197-y, International Journal of System Assurance Engineering and Management, ISSN 0975-6809, Vol 5, Issue 4, pp. 503-512
    Singh, M. and Markeset, T. (2014), Hybrid models for handling of variability and uncertainty in probabilistic and possibilistic failure analysis of corroded pipes, Engineering Failure Analysis, Engineering Failure Analysis, Available online April 13, http://dx.doi.org/10.1016/j.engfailanal.2014.04.008
    Barabadi, A., Barabady, J. and Markeset, T. (2014), Application of reliability models with covariates in spare part prediction and optimization - A case study, Reliability Engineering & System Safety, Volume 123, March 2014, Pages 1-7, http://dx.doi.org/10.1016/j.ress.2013.09.012 
    Singh, M., Markeset, T. and Kumar, U. (2013), Some philosophical issues in modeling corrosion of oil and gas pipelines, DOI 10.1007/s13198-013-0192-3, International Journal of System Assurance Engineering and Management, ISSN 0975-6809, Vol 5, Issue 1, pp 55-74
    Singh, M. and Markeset, T. (2013), Simultaneous handling of variability and uncertainty in probabilistic and possibilistic failure analysis of corroded pipes, DOI 10.1007/s13198-013-0202-5, International Journal of Systems Assurance Engineering and Management, ISSN 0975-6809, Vol 5, Issue 1, pp 43-54
    Markeset, T., Moreno-Trejo, J., Kumar, R. (2013), Maintenance of Subsea Petroleum Production Systems: A Case Study, Journal of Quality in Maintenance Engineering, DOI 10.1108/13552511311315940, Vol. 19 No. 2, pp. 128-143
    Moreno-Trejo, J., Kumar, R. and Markeset, T. (2012), Mapping Factors Influencing the Selection of Subsea Petroleum Production Systems – A Case Study, International Journal of System Assurance Engineering  and Management, DOI 10.1007/s13198-012-0090-0, Vol. 3, Issue 1, pp. 6-16
    Moreno-Trejo, J., Kumar, R. and Markeset, T. (2012), System Assurance of Subsea Petroleum Production Systems: A Case Study Mapping Factors Influencing the Sourcing Strategy, International Journal of Systems Assurance Engineering and Management, DOI: 10.1007/s13198-012-0108-7, Vol. 3, Issue 3, pp. 255-265
    Moreno-Trejo, J., Kumar, R., Markeset, T. (2012), Factors Influencing the Installation and Maintenance of Subsea Petroleum Production Equipment: A Case Study, Journal of Quality in Maintenance Engineering, Vol 18, Issue 4, pp. 454 - 471
    Ratnayake, C. and Markeset, T. (2012), Asset Integrity Management Towards Sustainable Performance, MaintWorld, No. 1, pp. 18-22
    Kumar, R., Barabady, J., Markeset, T. and Kumar, U. (2012), Improving Maintainability in Extreme Cold Climatic Conditions, International Journal of Performability Engineering, Vol. 8, No. 5, September, pp. 563-572
    Samarkoon, S.M.K., Markeset, T. and Gudmestad, O.T. (2012), Life Cycle Costing as a Tool for Selecting the Best Available and Qualified Technique for Managing Physical Assets, International Journal of Performability Engineering, Vol 8, No 3, May 2012, pp. 249-264
    Ratnayake, R.M.C. and Markeset, T. (2012), Asset Integrity Management for Sustainable Industrial Operations: Measuring the Performance, International Journal of Sustainable Engineering, DOI:10.1080/19397038.2011.581391, Volume 5, Issue 2, pp. 145-158
    Barabadi, A. and Markeset, T. (2011), Reliability and Maintainability Performance under Arctic Conditions, International Journal of System Assurance Engineering and Management, DOI 10.1007/s13198-011-0071-8, September, Volume 2, Issue 3, pp 205-217
    Barabadi, A., Barabady, J. and Markeset, T. (2011), A Methodology for Throughput Capacity Analysis of a Production Facility Considering Environment Condition, Reliability Engineering & System Safety, Vol. 96, Issue 12, pp. 1637-1646.
    Barabadi, A., Barabady, J. and Markeset, T. (2011), Maintainability Analysis Considering Time-Dependent and Time-Independent Covariates, Reliability Engineering & System Safety, Vol. 96, Issue 1, January, pp. 210-217
    Kayrbekova, D., Barabady, A. and Markeset, T. (2011), Maintenance Cost Evaluation and Uncertainty Analysis using Monte Carlo Simulation for a System to be Used in the Arctic Region, Journal of Quality in Maintenance Engineering, Vol. 17, No. 4, pp. 320-336
    Kayrbekova, D., Ghodrati, B. and Markeset, T. (2011), Activity-Based Life-Cycle Costing as an Alternative to Conventional LCC in Engineering Design, In: International Journal of System Assurance Engineering and Management, Vol. 2 No 2.
    Ghodrati, B., Markeset, T. and Ahmadi, A. (2011), Enhancement of Mining Machineries Performance through Supportability, International Journal of COMADEM, Vol. 14, No. 2, pp. 35-43
    Barabady, J., Markeset, T. and Kumar, U. (2010), Review and Discussion of Production Assurance Programs, International Journal of Quality and Reliability Management, Vol. 27, Issue 6, pp 702-720.
    Gao, X., Barabady, J. and Tore Markeset, T. (2010), An Approach for Prediction of Petroleum Production Facility Performance Considering Arctic Influence Factors, Reliability Engineering & System Safety, Volume 95, Issue 8, pp. 837-846.
    Uyiomendo, E.E. and Markeset, T. (2010), Subsea Maintenance Service Delivery: Mapping Factors Influencing Scheduled Service Duration, Special Section on Maintenance and Safety Management in Process Plants, International Journal of Automation and Computing (IJAC), Vol. 7 No. 2, pp. 167-172.
    Ratnayake, R.M.C. and Markeset, T. (2010), Technical Integrity Management: Measuring HSE Awareness Using AHP in Selecting a Maintenance Strategy, Journal of Quality in Maintenance Engineering, Vol. 16, No. 1.
    Ratnayake, R.M.C. and Markeset, T. (2010), Implementing Company Policies in Plant Level Asset Operations: Measuring Organizational Alignment, European Journal of Industrial Engineering, Vol. 4, No. 3. pp. 355-371
    Barabady, J., Markeset, T. and Kumar, U. (2010), A Framework for Improvement of Production Plant Performance using Production Assurance Programs, International Journal of Systems Assurance Engineering and Management, Vol. 1, No 1, pp. 59-65.
    Gao, X., Barabady, J. and Tore Markeset, T. (2010), Criticality Analysis of a Production Facility using Cost Importance Measures, International Journal of Systems Assurance Engineering and Management, Vol 1, No 1, pp. 17-23.
    Singh, M. and Markeset, T. (2009), A Methodology for Risk-based Inspection Planning of Oil and Gas Pipes Based on Fuzzy Logic Framework, Engineering Failure Analysis, Vol. 16, pp. 2098-2113
    Kumar, R., Panesar, S.S. and Markeset, T. (2009), Development of Technical Integrity Management Services – A Concept, Journal of Quality in Maintenance Engineering, Vol. 15, No. 3
    Markeset, T. and Kumar, U. (2009), Editorial – Special issue: “Developments in Industrial B2B Services”, International Journal of Services Technology and Management, Vol 11, No 1
    Panesar, S.S. and Markeset, T. (2009), Industrial Service Innovation Process: Influencing Factors – A Case Study, International Journal of Services Technology and Management, Vol 11, No 1, pp. 82-102
    Markeset, T. (2008), Design for High Performance Assurance for Offshore Production Facilities in Remote Harsh and Sensitive Environment, Quarterly Journal of the Operational Research Society of India, OPSEARCH, Vol.45, No.3, September, pp. 275-290
    Gao, X., Markeset, T. and Barabady, J. (2008), Design and Operational Maintainability Importance Measure: A Case Study, Quarterly Journal of the Operational Research Society of India, OPSEARCH Vol. 45, No. 3, September, pp. 189-208
    Panesar, S.S. and Markeset, T. (2008), Industrial Service Innovation Through Improved Contractual Relationships: A Case Study, Journal of Quality in Maintenance Engineering, Volume 14 Issue 3
    Panesar, S.S., Markeset, T., and Kumar, R. (2008), Industrial Service Innovation Growth and Barriers, International Journal of Services Technology and Management, Vol. 9, No 2, pp. 174-193
    Panesar, S.S. and Markeset, T. (2008), Development of a Framework for Industrial Service Innovation Management and Coordination, Journal of Quality in Maintenance Engineering, Vol. 14, No. 2, pp. 177-193
    Kumar, R. and Markeset, T. (2007), Development of Performance-Based Service Strategies for the O&G Industry: A Case Study, Journal of Business and Industrial Marketing, Vol. 22, Issue 4
    Kumar, R., Markeset, T. and Kumar, U. (2006), Implementation and Execution of Industrial Service Strategy: A Case Study from the Oil and Gas Industry, Journal of Quality in Maintenance Engineering, Vol. 12, No. 2
    Markeset, T. and Kumar, U. (2005), Study of Product Support Strategy: Conventional versus Functional Products, Journal of Quality in Maintenance Engineering, Vol. 11, No. 1
    Kumar, R., Markeset, T. and Kumar, U. (2004), Maintenance of Machinery: Negotiating Service Contracts in Business-to-Business Marketing, International Journal of Service Industry Management, Vol. 15, No. 4
    Markeset, T. and Kumar, U. (2003), Design and Development of Product Support and Maintenance Concepts for Industrial Systems, Journal of Quality in Maintenance Engineering, Vol. 9, No. 4.
    Markeset, T. and Kumar, U. (2003), Integration of RAMS and Risk Analysis in Product Design and Development Work Processes: A Case Study, Journal of Quality in Maintenance Engineering, Vol. 9, No. 4. 
    Firoozabadi, A., Markeset, T. and Dindoruk, B. (1997), Viscous Crossflow in Fractured Porous Media, Journal of Canadian Petroleum Technology, October, Volume 36, No 9 50-62
    Firoozabadi, A. and Markeset, T. (1995), Laboratory Studies in Fractured Porous Media: Part I - Reinfiltration for Gas Liquid Systems, IN SITU, 19 (1), 1-21, February
    Firoozabadi, A. and Markeset, T. (1995), Laboratory Studies in Fractured Porous Media: Part II - Capillary Crossflow, IN SITU, 19 (1), 23-39, February.
    Firoozabadi, A. and Markeset, T. (1994), Fracture-Liquid Transmissibility in Fractured Porous Media, SPE Reservoir Engineering Journal, August. 
     Papers in international conference proceedings with referee

    Peng, G. And Markeset, T (2018), Dynamic Maintenance Scheduling based on Cost Analysis and Genetic Algorithm for Offshore Facilities, In: The proceedings of The World Congress on Engineering Asset Management, paper presented at the WCEAM2018 conference, 24-26th of September, Stavanger, Norway
    Peng, G, Ai, S, Zhang, L, Rong, C and Markeset, T (2018), Equipment Life-cycle Management based on Private Blockchain and Smart Contract, In: The proceedings of The World Congress on Engineering Asset Management, paper presented at the WCEAM2018 conference, 24-26th of September, Stavanger, Norway
    Barabady, J, Gao, X, and Markeset, T (2017), Criticality analysis from maintainability point of view, In: The proceedings of the IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Dec, 10-13th, Singapore
    Bang, K.E. and Markeset, T. (2016), The Oncoming Waves of Competition, In: The 5th World Conference on Production and Operations Management (P&OM2016), Sept 6-10, Havana, Cuba
    Bang, K.E. and Markeset, T. (2016), Towards a New Type of Company: Changes in Company Assets and Core Activities and in Asset Management, In: The 5th World Conference on Production and Operations Management (P&OM2016), Sept 6-10, Havana, Cuba
    Bang, K.E. and Markeset, T. (2016), Measuring Changes in Outsourcing: A Case Study, In: The 5th World Conference on Production and Operations Management (P&OM2016), Sept 6-10, Havana, Cuba
    Balindres, AR, Kumar, R and Markeset, T (2016), Effects of Arctic Conditions on Human Performance, In: The Proceedings of the 7th International Conference on Applied Human Factors and Ergonomics  (AHFE2016), 27-31 July, Orlando, Florida, USA
    Kumar, R, Töres, T and Markeset, T (2016), Comparing Psychosocial Factors Associated with Job Stress among Administrative Staff and Cleaners, In: The Proceedings of the 7th International Conference on Applied Human Factors and Ergonomics (AHFE2016), 27-31 July, Orlando, Florida, USA
    Kusumawardhani, A. and Markeset, T. (2015), Asset integrity of deepwater petroleum production facilities, In: The Proceedings of The IEEE International Conference on Industrial Engineering and Engineering Management (IEEM2014), December 09-12th, Selangor, Malaysia
    Lokko, N.N.B., Raza, J., Markeset, T. and Panesar, S.S. (2014), Practical challenges in determining periodic maintenance intervals on the Norwegian Continental Shelf (NCS): Some expert views and opinions, In: The proceedings of The Maintenance Performance Measurement and Management Conference (MPMM2014), September 4-5th, Coimbra, Portugal, ISBN: 978-972-8954-42-0, DOI: http://dx.doi.org/10.14195/978-972-8954-42-0 
    Lokko, N.N.B., Raza, J., Markeset, T. and Panesar, S.S. (2014),Exploring the condition-based maintenance opportunities for production-critical assets, In: The proceedings of The Maintenance Performance Measurement and Management Conference (MPMM2014), October Coimbra, Portugal, ISBN: 978-972-8954-42-0, DOI: http://dx.doi.org/10.14195/978-972-8954-42-0  
    Kusumawardhani, A. and Markeset, T. (2014), Sourcing strategy for asset management support services of petroleum production facilities, To appear In: The Proceedings of The 6th International Conference on Operations and Supply Chain Management (OSCM2014), December 10-12th, Bali, Indonesia
    Kusumawardhani, A. and Markeset, T. (2014), Research design for industrial service studies, To appear In: The Proceedings of The 6th International Conference on Operations and Supply Chain Management (OSCM2014), December 10-12th, Bali, Indonesia
    Kusumawardhani, A. and Markeset, T. (2014), Information system challenges in managing asset integrity of  petroleum production facilities, To appear In: The Proceedings of The 6th International Conference on Operations and Supply Chain Management (OSCM2014), December 10-12th, Bali, Indonesia
    Moreno-Trejo, J. and Markeset, T. (2014), Power Distribution in Subsea Developments: a System Engineering Perspective, To appear in:  The Proceedings of the 2014 SPE Russian Oil & Gas Exploration and Production Technical Conference and Exhibition, 14-16 October, Moscow, Russia
    Ayele, Y.Z., Barabadi, A. and Markeset, T. (2013). Spare Part Transportation Management in High North, In: The Proceedings for the 22nd International Conference on Port and Ocean Engineering under Arctic Conditions (POAC2013), June 9-13th, Espoo, Finland
    Moreno-Trejo, J., Heras, E. and Markeset, T. (2013), Using HAZOP Analysis in the Maintenance, Modifications and Installation of Subsea Petroleum Production Systems, In: The Proceedings of the Annual Reliability and Maintainability Symposium (RAMS2013), DOI: 10.1109/RAMS.2013.6517771, Jan 28-31st, Orlando, Florida, USA
    Ang, H., Markeset, T. and Bang-Steinsvik, T.O. (2013), Condition Monitoring and Identification of Failure Modes of Subsea Electrical Equipment, In: The Proceedings of the Annual Reliability and Maintainability Symposium (RAMS2013), DOI: 10.1109/RAMS.2013.6517634, Jan 28-31st, Orlando, Florida, USA
    Ang, H., Markeset, T. and Bang-Steinsvik, T.O. (2012), Condition Monitoring of Oil and Gas Subsea Electrical Equipment - a Case Study of Åsgard Subsea Compression Project, In: The Proceedings of the 2nd International Workshop and Congress on eMaintenance (eMaintenance 2012), pp. 89-94, Dec 12-14th, Luleå, Sweden
    Barabadi, A., Ghodrati, B., Barabady, J. and Markeset, T. (2012), Reliability and Spare Parts Estimation Considering Operational Environments - A Case Study, In: The Proceedings of IEEE International Conference on Industrial Engineering and Engineering Management (IEEM2012), December 10-13th, Hong Kong, China
    Bencomo, A. and Markeset, T. (2012), Asset management challenges of offshore installations in Arctic regions, In: The Proceedings of the 31st International Conference on Ocean, Offshore and Arctic Engineering, OMAE2012, June 10-15th, Paper No: OMAE2012-83252, Rio de Janeiro, Brazil
    Kayrbekova, D., Panesar, S.S. and Markeset, T. (2012), Identification of Factors Causing Time and Cost Overruns in Offshore Petroleum Modification Projects, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
    Bang, K. E. and Markeset, T. (2012), Identifying the Drivers of Economic Globalization and the Effects on Companies’ Competitive Situation, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at APMS2011, September 26th-28th, 2011, Stavanger, Norway  
    Bang, K. E. and Markeset, T. (2012), Impact of Globalization on Model of Competition and Companies’ Competitive Situation, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at APMS2011, September 26th-28th, 2011, Stavanger, Norway
    Homlong, E., Kayrbekova, D., Panesar, S.S. and Markeset, T. (2012), Assessing Maintenance Time, Cost and Uncertainty for Offshore Production Facilities in Arctic Environment, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
    Palkar, S., Østgulen, K. and Markeset, T. (2012), Extending the Service Life Span of Ageing Oil and Gas Offshore Production Facilities, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway 
    Ravnestad, G., Panesar, S.S., Kayrbekova, D. and Markeset, T. (2012), Improving Periodic Preventive Maintenance Strategies Using Condition Monitoring Data, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
    Moreno-Trejo, J. and Markeset, T. (2012), Identifying Challenges in the Development of Subsea Petroleum Production Systems, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
    Moreno-Trejo, J. and Markeset, T. (2012), Mapping Factors Influencing the Selection of Subsea Petroleum Production Systems, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
    Moreno-Trejo, J. and Markeset, T. (2012), Identifying Challenges in the Maintenance of Subsea Petroleum Production Systems, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
    Kayrbekova, D. and Markeset, T. (2011), Non-Conventional Cost Methods in Engineering Decision-Making in Equipment Selection Process, In: The Proceedings of the Mine Planning and Equipment Selection Conference (MPES2011), October 12-14th, Almaty, Kazakhstan
    Ratnayake, R.M.C., Samarakoon, S.M.S.M.K. and Markeset, T. (2011), Maintenance Integrity: Managing Flange Inspections on Aging Offshore Production Facilities, In: Proceedings of the ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2011), June 19-24th, Rotterdam, The Netherlands
    Barabadi, A., Barabady, J. and Markeset, T. (2011), Uncertainty Analysis of System Reliability Assessment under Arctic Conditions, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    Barabadi, A., Hatami, M., Aliyari, M., Barabady, J. and Markeset, T. (2011), Reliability Analysis of an Electrical Power Distribution System Considering the Operational Environment: A Case Study, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    Gusfre, D. and Markeset, T. (2011), Integrating Condition Based Maintenance in Existing Preventive Maintenance Programs in the Norwegian Oil and Gas Industry, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    Homlong, E., Panesar, S.S., Kumar, R. and Markeset, T. (2011), Influence of Arctic Environment on Reliability, Availability, Maintainability and Supportability, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    Kumar, R., Markeset, T., Barabady, J. and Kumar, U. (2011), Ergonomic Issues at a Railway Maintenance Workshop, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    Ratnayake, R.M.C. and Markeset, T. (2011), Review of Current Trends in Asset Integrity Management, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    Shao, H., Panesar, S.S., Kumar, R. and Markeset, T. (2011), A Risk-based Method to Quantify the Contribution of Maintenance Activities in the Offshore Petroleum Industry, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    Sørensen, M., Barabady, J. and Markeset, T. (2011), Identification of Preventive Maintenance Intervals without the Use of Specialists: A Case Study, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway 
    Inegbedion, E.E., Trejo, J.M. and Markeset, T. (2011), Industrial Services in the Nigerian National Petroleum Corporation (NNPC), In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    Kale, P.B., Bang, K.E., Markeset, T. (2011), Impact of Globalization on the Norwegian Oil Service Industry Segments, In: The Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Management (COMADEM2011), May 30th -June 1st, Stavanger, Norway 
    Markeset, T. (2011), Developments of Industrial Services: A Review of Current Research in Norway, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    Barabadi, A., Barabady, J. and Markeset, T. (2010), Application of Accelerated Failure Model for Oil and Gas Industry in Arctic Region, In: The Proceedings of IEEE International Conference on Industrial Engineering and Engineering Management (IEEM2010), December 7-10th, Macau, China
    Markeset, T. (2010), Design for Performance: Review of Current Research in Norway, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2010), June 28-July 2nd, Nara, Japan
    Kayrbekova, D. and Markeset, T. (2010), Economic Decision Support for Offshore Oil and Gas Production in Arctic Conditions: Identifying the Need, In: The Proceedings of the European Safety and Reliability Conference (ESREL2010), September 5-9th, Rhodes, Greece
    Ratnayake, R.M.C. and Markeset, T. (2010), Maintaining Technical Integrity of Petroleum Flowlines on Offshore Installations: A Decision Support System for Inspection Planning, In: Proceedings of the ASME 2010 29th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2010), June 6-11th, Shanghai, China, Paper OMAE2010-20035
    Kumar, R., Barabady, J., Markeset, T. and Kumar, U. (2009), Ergonomic and Maintainability Design Issues in Mining, In: The Proceedings of the Mine Planning and Equipment Selection Conference (MPES2009), November 16-19th, 2009, Banff, Alberta, Canada
    Barabadi, A., Barabady, J. and Markeset, T. (2009), Management of Production Assurance in Harsh, Remote, and Sensitive Environment, In: The Proceedings of the 20th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC2009), June 9-12th, Luleå, Sweden
    Gao, X., Barabady, J. and Markeset, T. (2009), A New Approach for Prediction of Maintainability Considering Arctic Environmental Conditions, In: The Proceedings of the 20th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC2009), June 9-12th, Luleå, Sweden
    Kayrbekova, D. and Markeset, T. (2009), Life-Cycle Costing Analysis in Selection of Technical Alternative Solutions for Facilities to be Used in Arctic Locations, In: The Proceedings of the 20th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC2009), June 9-12th, Luleå, Sweden
    Kumar, R., Barabady, J. and Markeset, T. (2009), Improvement of Performance of Oil and Gas Production Facility in Arctic by applying Human Factors/ Ergonomic Principles in the Design Phase, In: The Proceedings of the 20th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC2009), June 9-12th, Luleå, Sweden
    Singh, M. and Markeset, T. (2009), Structural Analysis of Pipelines Containing Corrosion Defects, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2009), June 9-11th, San Sebastian, Spain
    Markeset, T. (2008), Design for Petroleum Production Performance in Arctic Locations Considering Maintenance and Support Services, In: The Proceedings of the Mine Planning and Equipment Selection Conference (MPES2008), October 20-22nd, Beijing, China
    Barabady, J., Markeset, T. and Kumar, U. (2008), Overall Production Assurance Effectiveness, In: The Proceedings of the 3rd World Congress on Engineering Asset Management and Intelligent Maintenance Systems (WCEAM-IMS 2008), ISBN 978-1-84882-216-0, Beijing International Convention Center, Oct, 28-30th, Beijing, China, pp 202-206
    Panesar, S.S., Kumar, R. and Markeset, T. (2008), Development of Maintenance Strategies for Offshore Production Facilities, In: The Proceedings of the 3rd World Congress on Engineering Asset Management and Intelligent Maintenance Systems (WCEAM-IMS 2008), ISBN 978-1-84882-216-0, Beijing International Convention Center, Oct, 28-30th, Beijing, China, pp 1227-1232
    Kayrbekova, D. and Markeset, T. (2008), LCC Analysis in Design of Oil and Gas Production Facilities to be Used in Harsh, Remote and Sensitive Environments, In: The Proceedings of the European Safety and Reliability Conference (ESREL2008), ISBN 978-0-415-48513-5, September 22-25th, Valencia, Spain
    Singh, M. and Markeset, T. (2008), Fuzzy Reliability Analysis of Corroded Oil and Gas Pipes, In: The Proceedings of the European Safety and Reliability Conference (ESREL2008), ISBN 978-0-415-48513-5, September 22-25th, Valencia, Spain
    Singh, M., Markeset, T. and Kumar, U. (2008), Failure Analysis of Corroded Oil and Gas Pipes Using Fuzzy Logic, In: The Proceedings of the 21st International Congress & Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM2008), June 11-13th, Prague, Czech Republic
    Markeset, T., Kumar, R. and Kumar, U. (2007), Remote Operations and Maintenance Support Services: A Conceptual Framework, In: The Proceedings of the Mine Planning and Equipment Selection Conference (MPES2007), December 11-13th, Bangkok, Thailand 
    Barabady, J., Markeset, T. and Kumar, U. (2007), Improvement of Production Plant Performance using Production Assurance Programmes, In: The Proceedings of the Swedish Production Symposium (SPS07), August 28-30th, Göteborg, Sweden
    Singh, M. and Markeset, T. (2007), Philosophical Aspects of Modeling Corrosion of Oil and Gas Pipelines, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2007), ISBN 978-91-631-8806-0, June 13-15th, Faro, Portugal
    Singh, M. and Markeset, T. (2007), Risk Analysis of Oil and Gas Pipelines Subjected to CO2 Corrosion, In: The Proceedings of the European Safety and Reliability Conference (ESREL2007), ISBN 978-0-415-44786-7, June 25-27th, Stavanger, Norway
    Panesar, S.S., Kumar, R. and Markeset, T. (2007), Innovation and Contracts in Business-to-Business Services, In: The Proceedings of The 2nd International Conference on Operations and Supply Chain Management (OSCM2007), ISBN: 978-974-677-637-0, May 18-20th, Bangkok, Thailand
    Markeset, T., Kumar, R. and Michel, J.E. (2007), Service Delivery Performance Measurement System: A Conceptual Framework, In: The Proceedings of The 2nd International Conference on Operations and Supply Chain Management (OSCM2007), ISBN: 978-974-677-637-0, May 18-20th, Bangkok, Thailand
    Gao, X., Markeset, T. and Kumar, U. (2007), A Review of Production Assurance in the Norwegian Petroleum Industry, In: The Proceedings of the Seventh International Conference on Reliability, Maintainability and Safety (ICRMS2007), ISBN 978-7-80144-682-4, August 20-26th, Beijing, China
    Gao, X. and Markeset, T. (2007), Design for Production Assurance Considering Influence Factors, In: The Proceedings of the European Safety and Reliability Conference (ESREL2007), ISBN 978-0-415-44786-7, June 25-27th, Stavanger, Norway
    Larsen, A. and Markeset, T. (2007), Mapping of Operations, Maintenance and Support Design Factors in Arctic Environments, In: The Proceedings of the European Safety and Reliability Conference (ESREL2007), ISBN 978-0-415-44786-7, June 25-27th, Stavanger, Norway
    Panesar, S.S. and Markeset, T. (2006), Maintenance Optimization Process in the Norwegian Petroleum Industry – Key Issues, Challenges, and Opportunities, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2006), ISBN 978-91-631-8806-0, June 11-15th, Luleå, Sweden
    Panesar, S.S. and Markeset, T. (2006), Trends in Product Support and Service Strategies, In: The Proceeding of EUROMAINTENANCE2006 conference, ISBN 3-9523151-0-9 (old), ISBN 978-3-9523151-01, June 20-22nd, Basel, Switzerland
    Kumar, R. and Markeset, T. (2005), RCM as a Tool to Improve Production Performance – Examples from Norwegian Industry, In: The Proceedings of Geominetech Symposium on “New Equipment-New Technology management and Safety” in Mining and Mineral based Industries, May 11-12th, Bhubaneswar, India
    Markeset, T. and Kumar, U. (2005), The use of Life Cycle Costs and Profit Assessment to Improve Operations and Supply Chain Management Performance of Complex Oil Production Facilities, In: The Proceedings of The First International Conference on Operations and Supply Chain Management (OSCM2005), ISBN 979-545-039-5, December 15-17th, Bali, Indonesia
    Kumar, R., Panesar, S.S. and Markeset, T. (2005), Strategy Development for Industrial Services and Product Support, In: The Proceedings of The First International Conference on Operations and Supply Chain Management (OSCM2005), ISBN 979-545-039-5, December 15-17th, Bali, Indonesia
    Panesar, S.S. and Markeset, T. (2005), The role of Industrial Support Service in Operation and Maintenance in the Norwegian Oil and Gas Industry, In: The Proceedings of The First International Conference on Operations and Supply Chain Management (OSCM2005), ISBN 979-545-039-5, December 15-17th, Bali, Indonesia
    Markeset, T. and Kumar, R. (2004), Experiences from Implementation of Smart OMS to Enhance Operation and Maintenance Performance in the Norwegian Industry, In: The Proceeding of the International Conference on Intelligent Maintenance Systems (IMS2004), July 15-17th, Arles, France
    Markeset, T. and Kumar, U. (2004), Dimensioning of Product Support - Issues, Challenges, and Opportunities, In: The Proceedings of The Annual Reliability and Maintainability Symposium (RAMS2004), ISBN 0-7803-8215-3, ISSN 0149-144X, January 26-29th, Los Angeles, California, USA (Highlights from PhD thesis)
    Markeset, T. and Kumar, U. (2003), Integration of RAMS Information in Design Processes – a Case Study, In: The Proceedings of The Annual Reliability and Maintainability Symposium (RAMS2003), ISBN 0-7803-7717-6, ISSN 0149-144X, January 27-31st, Tampa, Florida, USA: 220-225
    Markeset, T., Kumar, R. and Kumar, U. (2003), Trends in Product Support and Service Delivery Strategy for Mining Industry, In: The Proceedings of the Geominetech Symposium on New Equipment – New Technology, Management and Safety in Mining and Mineral Based Industries, May 11-12th, Bhubaneswar, India.
    Markeset, T. and Kumar, U. (2002), Design and Development of Product Support & Maintenance Concepts for Industrial Systems, In: The Proceedings of the International Foundation for Research in Maintenance: Maintenance Management & Modelling, IFRIMMmmm2002, May 6-8th, Växjö, Sweden.
    Markeset, T. and Kumar, U. (2002), Integration of RAMS and Risk Analysis in Product Design & Development Work Processes – A case study, In: The Proceedings of The International Foundation for Research in Maintenance: Maintenance Management & Modelling, IFRIMMmmm2002, May 6-8th, Växjö, Sweden.
    Markeset, T. and Kumar, U. (2001), Design and Development of Service and Maintenance Concepts for the Mining Industry, In: The Proceedings of the 10th International Symposium on Mine Planning & Equipment Selection (MPES2001), November 19-21st, New Delhi, India
    Markeset, T. and Kumar, U. (2001), R&M and Risk-Analysis Tools in Product Design, to Reduce Life-Cycle Cost and Improve Attractiveness, In: The Proceedings of the Annual Reliability and Maintainability Symposium (RAMS2001), ISBN 0-7803-6615-8, ISSN 0149-144X, Jan 22-25th, Philadelphia, USA: 116-122
    Liyanage, J.P., Markeset, T. and Kumar, U. (2001), On the Knowledge Driven Maintenance Performance Management Grounded in Process Intelligence: With Applications to Asset Maintenance and Product Development, In: The Proceedings of the 2nd European Conference on Intelligent Management Systems in Operations (IMSIO-2001), Operational Research Society, July 3-4th, Salford, UK
    Liyanage, J.P., Markeset, T., Kørte, J. and Kumar, U. (2001), Value & Risk: A balanced Performance Assessment Criterion for Maintenance in Offshore Engineering Constructions, In: The Proceedings of the 11th International Offshore & Polar Engineering Conference (ISOPE-2001), International Society of Offshore and Polar Engineers (ISOPE2001), June 18-22nd, Stavanger, Norway 
    Markeset, T. and Kumar, U. (2000), Application of LCC Techniques in Selection of Mining Equipment and Technology, In: The Proceedings of the 9th International Symposium on Mine Planning and Equipment Selection (MPES2000), Nov 6-9th, Athens, Greece
    Firoozabadi, A., Markeset, T. and Wong, T.W. (1996), Gravity Drainage in Layered-Media: Experiments and Analysis, SPE 35720, In: The Proceedings of the Society of Petroleum Engineers (SPE) Western Regional Meeting, May 22nd
    Firoozabadi, A. and Markeset, T. (1994), Miscible Displacement in Fractured Porous Media: Part I - Experiments, SPE/DOE 27743, In The proceedings of The 9th SPE/DOE Symposium on Improved Oil Recovery, April 17-20th, Tulsa, Oklahoma, USA
    Firoozabadi, A. and Markeset, T. (1992), An Experimental Study of Capillary and Gravity Crossflow in Fractured Porous Media, SPE24918, In: The Proceedings of the 67th Annual Conference and Exhibition of the Society of Petroleum Engineers (SPE), October 4-7th, Washington DC, USA
    Firoozabadi, A. and Markeset, T. (1992), An Experimental Study of the Gas-Liquid Transmissibility in Fractured Porous Media, SPE24919, In: The Proceedings of the 67th Annual Conference and Exhibition of the Society of Petroleum Engineers (SPE), October 4-7th, Washington DC, USA
    Theses

    Markeset, T., (2003), Dimensioning of Product Support: Issues, Challenges, and Opportunities, Doctoral Thesis No. 6, University of Stavanger, ISBN 82-7644-197-1, ISSN 1502-3877, http://hdl.handle.net/11250/2412136 
    Markeset, T. (1991), A Comparison between Hammer Impact Excitation Technique and Pseudo Random Noise Excitation Technique for Performing Experimental Modal Analysis, Master Thesis, University of Minnesota, Part 1: Thesis, Part 2: Figures


    Forskningsinteresser

    Industriell teknologi og driftsledelse, Industrielle tjenester, Drift og vedlikehold ingeniørvitenskap og ledelse, sensorbasert tilstandsovervåkning, risikobasert inspeksjon, livssyklus kosnad, Innovasjon i tjenester.



    CV

    Curriculum Vitae Professor Dr. Ing Tore Markeset  (Linkedin , CV UiS)

    Head, Dept. of Safety, Economics and Planning, Professor of Mech. Eng. (Operations and Maintenance), University of Stavanger


    Adjunct Professor of Operation and Maintenance, University of Tromsø, Dept. of Engineering and Safety, Faculty of Science and technology
    Address: University of Stavanger, N-4036 Stavanger, Norway
    Contact: tore dot markeset at uis dot no (e-mail)

    Short bibliography

    Dr. Tore Markeset started working at the University of Stavanger since 1999 - first as a research fellow earning a doctoral degree in 2003, thereafter as associate professor, and from 2009 as full professor in mechanical engineering, specializing in operations and maintenance engineering and management. He also has served in an 20% adjunct position at The Arctic University of Norway, UiT, in Tromsø since 2007. 

     


    Since October 2014 he has been serving as a the Head of the Department of Safety, Economics and Planning (earlier the Dept of Industrial economics, Risk management and Planning until end of 2017). Since August 2016 he also served first as Functioning Head of the Petroleum Engineering Department, thereafter Interim Head until June, 2018. In October 2017 this department was split in two and Markeset served as Interim head for both departments (Dept of Energy Resources and Dept of Energy and Petroleum Engineering).

     


    Markeset has played a central role in establishing several master degrees as well as master degree courses in industrial asset management at the University of Stavanger and at the The Arctic University of Norway. His research interests include: industrial services (product support, innovation, strategy development, sourcing strategies, contractual relationship performance, subsea services, etc.) and industrial asset management (operations, maintenance and support management, design for performance and production performance management).

     


    He received a BSc degree in petroleum engineering from the University of Stavanger in 1985, and further earned a BSc and MSc degree in mechanical engineering from the University of Minnesota, USA, in 1989 and 1991 respectively. After working in the industry for a number of years within process, mechanical and reservoir engineering, he attained a PhD degree in offshore technology – operations and maintenance from the University of Stavanger in 2003. 

     


    Markeset has successfully supervised 13 PhD, over 100 MSc and 3 BSc theses, and is currently the main supervisor of 3 and co-supervisor of 2 PhD projects. He has participated in publishing more than 140 publications in international journals, conference proceedings, theses and reports. 

     


    He serves on the Editorial Board of Journal of Quality in Maintenance Engineering (JQME); the International Journal of Systems Assurance Engineering and Management (IJSAEM); The International Journal of Logistics and Transport (IJLT) and the Operations and Supply Chain Management Journal (OSCM). He also served as a Special Issue Editor for the International Journal of Services Technology and Management and as Ad-hoc Reviewer for Journal of Reliability Engineering, and System Safety; International Journal of Service Industry Management, International Journal of Production Economics, Journal of Risk and Reliability, Production planning and Control: The Management of Operations.

     


    Research

    Industrial asset management, Industrial services, Operation and maintenance engineering and management, Sensor based condition monitoring, Risk based inspection, Life cycle costing, Innovation in services

     


    Google h index: 23 (June 2020) 

    Scopus h index: 20 (June 2020)

    Orchid ID

     


    Professional and academic positions

    • Head, Dept. of Safety, Economics and Planning, University of Stavanger (UiS), 2014/10–present. (From January 2018 the name was changed from Dept. of Industrial economics, Risk management and Planning)
    • Interim Head, Dept. of Energy Resources, UiS, 2017/10–2018/6
    • Interim Head, Dept. of Energy and Petroleum Engineering, UiS, 2017/10–2018/6
    • Interim Head, Dept of Petroleum Engineering, from 2017/05-2017/10. The department was split in two departments in October 2017 - the Dept. of Energy Resources and the Dept. of Energy and Petroleum Engineering 
    • Acting Head, Dept. of Petroleum Engineering, UiS, October 2016–May 2017
    • Professor of Mechanical Engineering (Operations and Maintenance), Department of Mechanical and Structural Engineering and Material Science, 2009/9–present. Associate Professor in same area and department from 2003/5 to 2009/8, University of Stavanger (UiS)
    • Adjunct Professor (20% position), Department of Technology and Safety, 2010/1–present, Adjunct Assoc. Prof. 2009/1–2009/12 (UiT), 2007/12–2008/12 (Tromsø University college - merged with University of Tromsø in 2010), The Arctic University of Norway (UiT)
    • Guest Professor/Research Scholar, University of Houston, Houston, Texas, Sabbatical leave, 2013/10-2014/09
    • Member of the Board and Project manager, 2005/4-2013/9, Executive leader and project advisor: 2003/12 – 2005/04, CIAM (Center for Industrial Asset Management), UiS
    • Doctoral Student in Offshore Engineering, Operations and Maintenance, 1999/8–2003/6, Stavanger University College (now UiS)
    • Senior process/ mechanical engineer, Stavanger and Bergen, Norway, 1997/3–2003/5, Kværner Oil and Gas (now AkerSolutions)
    • NATO soldier/ serving as a Computer specialist in the Norwegian Logistics Battalion, Modrica and Tuzla, Bosnia Herzegovina, 1996/1–1997/2, NATO: Peace Implementation Force (IFOR)/ Peace Stabilization Force (SFOR)
    • Senior R&D Engineer, Ulsteinvik, Norway, 1994/6–1997/2, Ulstein Propeller (now Rolls Royce):
    • Reservoir Research Engineer, Palo Alto, (Silicon Valley), California, USA, 1991/1–1994/2 + summer 1990, Reservoir Engineering Research Institute (RERI)
    • Reservoir Research Engineer, Bergen, Norway, 1985/8–1987/9 + Summers of 1985, 1988, 1989, Norsk Hydro Research Center (now Statoil)

     

    Education

    • Dr. Ing., Offshore Technology – Operations and Maintenance, Stavanger University College (now University of Stavanger): 1999-2003
    • MSME (MSc in Mech. Eng.), Mechanical Engineering, Design and Controls, University of Minnesota: 1989-91
    • BME (Bachelor of Mech. Eng.), Mechanical Engineering, Design and Controls, University of Minnesota: 1987-89
    • One year study in Petroleum Engineering on the top of a 2 year study in Mechanical engineering from Bergen University College, Qualifies to a BSc in Petroleum Engineering, Stavanger Regional College: (later Stavanger University College, now University of Stavanger), 1984-85
    • Two year Degree in Mechanical engineering, Bergen University College: 1982-84

     

    Short courses

    • University Leadership training - “Dekanskolen” (University leadership training), 4 x 3 day meetings, 2015-2016
    • University Leadership training - leadership group meetings - 8 half-day meetings, 2015-2016
    • University Pedagogics “UniPed”, 2010/11

     

    Professional activities

    • One of the architects behind the establishing of 1) the Norwegian MSc degree in Industriell teknologi og driftsledelse (2006), 2) the international MSc program in Offshore technology with (at that time) three specializations in Risk Management, Industrial Asset management and Marin and Subsea Technology (2007), 3) Experience based master degree in Technology and operation management, 4) the International MSc degree in Technology and safety in the High North at the UiT (2009/2010)
    • Participant of UiS expert group for establishing a National center for petroleum activities in the Arctic. The “Roald Amundsen petroleum research center” was established in January 2013. Co-lead the organization of research activities in one of the work packages, 2013-present.
    • Participant of 2 Expert panels the Belgian research council FWO (Fonds voor Wetenschappelijk Onderzoek) for assessment and prioritization of the distribution of research funding to qualified applicants. Two assessor meetings per year, 2012-present
    • Project leader and principal researcher for the project titled “Mapping and analysis of characteristics of modern industrial services”, 2013-Present
    • Project leader and principal researcher for the project titled “Integrated framework for production facility maintenance support services”, 2013-Present
    • Project leader and principal researcher for the project titled “Creation of “Just in time” maintenance services for the Norwegian Offshore Industry”, 2012-Present.
    • Developed and served as project leader for three continuing education projects for COSL China, and administrate the study plans, contracts and cost plans, as well as the student intake. So far we have offered three programs in the MSc in Offshore technology (specializations in Industrial asset management (16 students from 2011-2013), Marine and subsea (0 students) and Risk Management (0 students) and one program in the MSc in Industrial economics (7 students from 2012-2014 and 7 students from 2013-2015). Teaching 3 of the courses and supervising some of the MSc students for Master thesis.
    • Lead PhD defense of PhD candidate Nikolett Sipöcz, Nov. 17th, 2011.
    • Project leader and principal researcher for the project titled “Analysis and development of project, sourcing and contractual strategies for providing deep sea drilling, pipeline and marine technology and operational and maintenance services”, 2009-2012.
    • Project leader and principal researcher for the project titled “Industrial service innovation and management in a globalized world”, 2009-2012.
    • Project leader and principal researcher for the project titled “Design for operations, maintenance and support (OMS) of complex production facilities in remote, harsh and sensitive environments”. 2006–present. 
    • Project leader and principal researcher for the project titled “Risk based inspection for pipe influenced by corrosion degradation mechanisms”. 2006–present
    • Project leader and principal researcher for the project titled “Industrial services innovations practices, processes and relationships in the Norwegian oil and gas industry”. 
    • Project leader for activities in a collaboration development project with Kazakh British Technical University (KBTU), Almaty, Kazakhstan. 2005–2007. 
    • Project leader and principal researcher for “Industrial services and innovation strategies in the knowledge intensive economy: mapping of players, roles, content, practices, and needs”. 2005–2006. 
    • Project leader and principal research for PhD project “Service strategies for operations and maintenance of offshore O&G production facilities”, funded by C-Partner (now part of AGR EMI Team), Aker Kværner Offshore Partner, and Center for Industrial Asset Management at the University of Stavanger. 2003–2006.

     

    Supervision

    PhD supervision

    • Dr. Knut Espen Solberg: 2015-2020, Co-supervisor: Thesis: Solberg, K.A. (2020) Safety and Emergency Response Associated with Cold Climate Marine Operations, PhD thesis UiS; 493 January 2020, ISBN: 978-82-7644-893-1; ISSN: 1890-1387, He is employed in DNV-GL
    • Dr. Andika Rachman Yahya: 2016-2019. Co-supervisor. Thesis: Rachman, A. (2019) Artificial intelligence - approaches to lean risk-based inspection assessment, PhD thesis UiS; 457 April 2019, ISBN: 978-82-7644-844-3; ISSN: 1890-1387 He is self employed
    • Dr. Mayang Kusumawardhani: 2013-2016, Main Supervisor. Thesis: Kusumawardhani, M. Asset integrity management challenges, planning and implementations, PhD thesis UiS; 306, ISBN: 978-82-7644-665-4; ISSN: 1890-1387, http://hdl.handle.net/11250/2410898, She is working in Yinson, Singapore
    • Dr. A.M.N Damika B. Seneviratne: 2012-2015, Co-supervisor. Thesis: Seneviratne, D., Risk based in-service inspection planning : modeling, integration and mechanization, PhD thesis UiS No 257, ISBN: 9788276446074, ISSN: 1890-1387 He is employed as Scientific Researcher at Tecnalia Research & Innovation, Sweden
    • Dr. Jorge Moreno-Trejo: 2009-2012, Main supervisor. Thesis: Moreno-Trejo, J. (2012), Subsea Production Systems and Services: Concept selection, Installation and Maintenance, PhD thesis UiS No. 170, ISBN 978-82-7644-503-9, ISSN 1890-1387. He is running his own company, JPH Analytics , and is also employed as Adjunct Associate Professor, Oslo Metropolitan University, OsloMet, Oslo, Norway.
    • Dr. Knut Erik Bang: 2009-2012, Main supervisor. Thesis: Bang, K.E. (2012), Globalization and Changes to Companies’ Competitive Environment, PhD Thesis UiS No. 169, University of Stavanger, ISBN: 978-82-7644-502-2, ISSN: 1890-1387, He is employed as Associate Professor at ISØP/University of Stavanger, Stavanger.
    • Dr. Abbas Barabadi: 2008–2011, Main supervisor. Thesis: Barabadi, A. (2011) Production Performance Analysis: Reliability, Maintainability and Operational Conditions, PhD Thesis UiS No. 144, University of Stavanger, ISBN 978-82-7644-471-1, ISSN 1890-1387, http://hdl.handle.net/11250/183203 He is employed as Professor at University of Tromsø, Tromsø
    • Dr. S.M. Samindi M.K. Samarakoon: 2009-2011, Co-supervisor. Thesis: Samarakoon, S.M.K. (2011), Qualification of Best Available Techniques: Economic, Health, Safety and Environmental Considerations, PhD Thesis UiS No. 140, University of Stavanger, ISBN 978-82-7644-467-4, ISSN 1890-1387. She is employed as Associate Professor at University of Stavanger, Stavanger.
    • Dr. Dina Kayrbekova: 2007–2011, Main supervisor. Thesis: Kayrbekova, D. (2011). Activity-Based Life-Cycle-Cost Analysis: Design, Operation and Maintenance in Arctic Environment, PhD thesis No. 134, University of Stavanger, ISBN 978-82-7644-459-9, ISSN 1890-1387, http://hdl.handle.net/11250/183201, She is working in Neptune Energy, Stavanger, and as Adjunct Assoc. Professor, University of Stavanger
    • Dr. Xueli Gao: 2006–2009, Main supervisor. Thesis: Gao, X. (2009). Design for Production Performance: Reliability, Maintainability and Arctic Conditions, PhD Thesis UiS No 85, University of Stavanger, ISBN 978-82-7644-394-3, ISSN 1890-1387. Spesialist engineer, Aker Engineering & Technology, Oslo, and Senior Research Scientist, Institute for Energy Technology (IFE)
    • Dr. R.M. Chandima Ratnayake: 2008–2009, Main Supervisor. Thesis: Ratnayake, C. (2009). Industrial asset integrity management: Sustainability, Balanced performance and Organizational alignment. PhD Thesis UiS No 86, University of Stavanger, ISBN 978-82-7644-395-0, ISSN 1890-1387. He is employed as Professor at University of Stavanger. 
    • Dr. Maneesh Singh: 2006–2009, Main supervisor. Thesis: Singh, M. (2009). Evaluation of Structural Integrity of Corroded Oil and Gas Pipes, PhD Thesis UiS No 67, ISBN 978-82-7644-371-4, ISSN 1890-1387. This is Dr Singh’s second PhD. He also holds a PhD in Material Science from Luleå University of Technology (2003). He is employed as Professor at Western Norway Univ. of Applied Sciences, Bergen.
    • Dr. Sukhvir Singh Panesar: 2005–2007. Main supervisor. Thesis: Panesar, S.S. (2007). Industrial Service Innovations: Practices, Processes and Service Relationships, PhD Thesis UiS No 46, University of Stavanger, ISBN 978-82-7644-339-4, ISSN 1890-1387. He is employed ConocoPhillips, Stavanger
    • Dr. Javad Barabady: 2006–2007, Co-supervisor. Thesis: Barabady, J. (2007). Production Assurance: Concepts, Implementation and Execution, PhD No. 2007:51, Luleå University of Technology, Sweden, ISSN 1402-1544, ISRN LTU-D-07/51-SE, http://ltu.diva-portal.org/smash/get/diva2:999333/FULLTEXT01.pdf  He is employed as Professor at University of Tromsø. 
    • Dr. Rajesh Kumar: 2004–2006. Main supervisor. Thesis: Kumar, R. (2005). Industrial Service Strategy: Development, Implementation and Execution, PhD Thesis UiS No 19, University of Stavanger, ISBN 82-7644-278-1, ISSN 0809-6775, http://hdl.handle.net/11250/2412108  He is working in ConocoPhillips, Stavanger, and as Adjunct Assoc. Prof., Univ. of Stavanger
    • Mr. Nii Nortey Clarence Basil Lokko: 2012-2019, Main Supervisor. Optimizing periodic preventive maintenance strategies through condition monitoring. Project suspended. He is employed as Maintenance Engineer, Aker Solution
    • Mr. Haresh Ramrattan, 2017-present, Main Supervisor. University of the West Indies, Develop an Asset Integrity Management System to improve on sustainable performance of Energy Sector Organizations: The case of Trinidad and Tobago, The student is attending the University of the West Indies, Trinidad and Tobago
    • Mr. Guicang Peng: 2018-present. Main Supervisor, Service Innovation based on Digitalization and Data Mining
    • Albara Mustufa: 2018-present: Co-Supervisor, Maintenance of windmills in arctic conditions, UiT The Arctic university of Norway 
    • Felix Preshanth Santhiapillai, 2019, Co-supervisor, Lean management of service operations in public sector, UIS

     

     


    Master and Bachelor thesis supervision

    Main supervisor and advisor of more than 100 Master and Bachelor theses.

     


    Teaching

    University of Stavanger 2002 – present:

    Condition monitoring and management, (5 ECTS) (Master course)
    Operation and maintenance management, (5 ECTS) 
    Industrial services, (5 ECTS) (Master course)
    Selected topics in operations and maintenance, (15 ECTS) (Doctoral course)
    Selected topics in industrial services, (10 ECTS) (Doctoral course)
    Operation and Maintenance in Northern Areas, (5 ECTS) (Master course), For industrial company 

     

    University of Tromsø 2007–Present

    Operations of process facilities, (10 ECTS), Codeveloped course curriculum 
    Operations and maintenance management, (10 ECTS) (Teaching 5 sp)
    Risk based inspection and condition monitoring, (10 ECTS) (teaching 5 sp)
    Operations, maintenance and economics, (10 ECTS) (Teaching 5 sp)

     

    Sensor: 

    PG430 – Operations of process facilities (10 ECTS) in 2005 and 2006
    SM210 – Risk analysis (10 ECTS) in 2008
    SM310 – Northern Area Cold Technology (10 ECTS) in 2009

     

    Course advisor

    PG430 – Operations of process facilities, 2004

     

    Luleå University of Technology

    Guest lecturer:

    Industrial services, 2006

     

    University of Minnesota 1989–1991

    Teaching assistant

    Vibration and sound laboratory (3 semesters), Design morphology (1 semester), Engineering drawing (1 semester) 

     

    Courses for industry

    Markeset, T. (2013), Set up and administrated study plan, contract and cost plan for Master degree in industrial economics for 7 students from COSL China. Teaching 3 of the courses and supervising some of the MSc students for Master thesis.
    Markeset, T. (2012), Set up and administrated study plan, contract and cost plan for Master degree in industrial economics for 7 students from COSL China. Teaching 3 of the courses and supervising some of the MSc students for Master thesis.
    Markeset, T. (2011), Set up study plan, contract and cost plan for Master degree in offshore technology -specialization in industrial asset management for 16 students from COSL China. Teaching 3 of the courses and supervising 6 MSc students for Master thesis.
    Markeset, T. (2010), Operations and Maintenance for Wind Farms, 5 ECTS, University of Stavanger, Stavanger, Norway (Not taught due to few participants).
    Markeset, T. (2009), Operations and Maintenance in Northern Arctic Areas, 5 ECTS, University of Stavanger, Stavanger, Norway (For Acergy)
    Markeset, T. and Liyanage, J.P. (2003), Introduction to Operation, Safety, and Maintenance Management, 5 ECTS, University of Stavanger, Stavanger, Norway (Industrial Companies in Northern Norway) 

     

    PhD evaluation assignment

    • Member of Assessor Committee, Luleå University of Technology, Sweden, March 3rd, 2016, To examine thesis and participated in oral defense of Dr. Mustafa Aljumaili, Title of thesis: “Data Quality Assessment: Applied in Maintenance”
    • Member of Board of Examiner, Indian Institute of Technology, Delhi, India, 2013, Examined the thesis of Dr. Aju Kumar, Title of thesis: “Development of design based structural methodology for enhancing system maintenance performance considering human and environmental aspects”
    • Member of Board of Examiner, Indian Institute of Technology, Delhi, India, 2011, Examine the thesis of Dr. Suvandan Saraswat, Title of thesis: “Developing RAMS based performance evaluation methodology for a system”
    • Backup Member of Assessor Committee, Luleå University of Technology, Sweden, December 20th, 2011, To examining thesis and participating in oral defense of Dr. Yuan Fuqing, Title of thesis: “Failure diagnostics using support vector machine”
    • Member of Assessor Committee, University of Stavanger, Norway, January 23rd, 2009, Examine thesis and participating in oral defense of Dr. Alsnosy Balbaa, Title of thesis: “Managing Environmental Sustainability in Seaports: Towards an Integrated Method”

     

    Research grants

    • University of Stavanger (Sabbatical grant), “Mapping and analysis of characteristics of modern industrial services”, 2013-2014.
    • University of Stavanger (KD financed), “Framework for offshore maintenance support services”, One PhD student fully financed, 2013-2016.
    • Apply Sørco, “Optimizing periodic preventive maintenance strategies through condition monitoring”, One PhD student fully financed, 2012-2015. 
    • PEMEX Exploration and Production, “Analysis and development of project, sourcing and contractual strategies for providing deep sea drilling, pipeline and marine technology and operational and maintenance services”, One PhD student fully financed, 2009-2012.
    • University of Stavanger (KD financed), “Industrial service innovation and management in a globalized world”, One PhD student fully financed, 2009-2012.
    • The Research Council of Norway and Eni-Norge, “Design for operations, maintenance and support (OMS) of complex production facilities in remote, harsh and sensitive environments”, 2006–2010, One PhD student fully financed and two PhD students partly financed.
    • AGR EMI Team (now part of Oceaneering) and the University of Stavanger, “Risk based inspection for pipe influenced by corrosion degradation mechanisms”, 2006–2009, One PhD student partly financed in the project. 
    • AGR EMI Team (now part of Oceaneering) and the University of Stavanger, “Industrial service innovation processes”, 2006–2009, One PhD student financed in the second and third year of study. 
    • Research Council of Norway, “Industrial services and innovation strategies in the knowledge intensive economy: mapping of players, roles, content, practices, and needs”, 2005. One PhD student financed in the first year of study.
    • The Norwegian Centre for International Cooperation in Higher Education (SIU). Collaboration development project with Kazakh British Technical University (KBTU), Almaty, Kazakhstan, 2005–2007. One PhD student partly financed. 
    • C-Partner (Later AGR EMI Team, now part of Oceaneering), Aker Kværner Offshore Partner (now Aker solutions), and Center for Industrial Asset Management at the University of Stavanger. “Service strategies for operations and maintenance of offshore O&G production facilities”, 2004–2006. One PhD student financed for 2 years.
    • Stavanger Municipality and Stavanger University College (now University of Stavanger), “Design for operations and maintenance”, 1999-2003. One PhD study financed.

     

    Longer academic stays

    • University of Houston, Subsea group - Mechanical engineering department, 12 months, 2013-2014
    • Luleå University of Technology, Division of Operations and Maintenance, 6 weeks in 2003
    • Luleå University of Technology, Division of Operations and Maintenance, 15 weeks in 2002
    • Delft University of Technology, 14 weeks in 2002

     

    Editorial work and referee assignments 

    • Editor: Journal of Quality in Maintenance Engineering (JQME)
    • Editor: International Journal of Systems Assurance Engineering and Management (IJSAEM)
    • Member of Editorial Board: International Journal of Logistics and Transport (IJLT), Operations and Supply Chain Management: An International Journal (OSCM)
    • Special Issue Editor: International Journal of Services Technology and Management (IJSTM), Vol 11, No 1, 2009, “Developments in Industrial B2B Services”.
    • Ad-hoc Reviewer: Journal of Reliability Engineering and System Safety (RESS), Journal of Quality in Maintenance Engineering (IJQME), International Journal of Service Industry Management (IJSIM), International Journal of Production Economics (IJPE), Journal of Risk and Reliability, Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, Proceedings of the Institution of the IMechE Part C Journal of Mechanical Engineering Science, International Journal of COMADEM, International Journal of Performability Engineering, Production Planning & Control: The Management of Operations, Computers in Industry, 

     

    Conference assignments

    Member of International Scientific Committee, The 2nd international workshop and congress on eMaintenance, Luleå University of Technology, Luleå, Sweden, December 12-15th, 2012
    Session Chair, Reviewer, Member of Local Organizing Committee, International Conference on Advances in Production Management Systems, APMS2011, September 26-28th, Stavanger, Norway, 2011.
    Session Chair, Reviewer, Member of Program Committee, Condition Monitoring and Diagnostic Engineering Management, Comadem2011, May 30th-June 1st, Stavanger, Norway, 2011.
    Member of International Scientific Committee, Second Iranian Conference on Reliability Engineering -(Reli2011), October 24-26th, 2011, Tehran, Iran.
    Session Chair, Condition Monitoring and Diagnostic Engineering Management, Comadem2010, June 28th-July 2nd, Nara, Japan, 2010.
    Advisory Board Member, Reviewer, The 1st international workshop and congress on eMaintenance, eMaintenance2010, June 22-24th, 2010, Luleå, Sweden
    International Committee Member, The Third International Conference on Operations and Supply Chain Management, OSCM2009, Bujang Valley, Malaysia, 2009.
    Advisory Committee Member, The 1st International Conference on Logistics and Transport, ICLT2009: “Innovation Management in Global logistics and Transport”, Thailand, 2009.
    Session Chair, The Mine Planning and Equipment Selection Conference (MPES2008), Beijing, 2008.
    Session Chair and Organizing Committee Member, The International Conference on Reliability, Maintainability and Safety, ICRMS2007, Beijing, China, 2007.
    Reviewer, The Second International Conference on Operations and Supply Chain Management, OSCM2007, Bangkok, Thailand, 2007.
    International Committee Member, Condition monitoring and diagnostic engineering management, Comadem2006, Luleå, Sweden, 2006.
    Session Chair, The International Conference on Intelligent Maintenance Systems, Arles, France. 2004.
    Chairman, Head of Organizing Committee, Committee Participant, The Rogaland Maintenance and Asset Management Conference (Drift og Vedlikeholdsdagene i Rogaland - DVR). 2004, 2005, 2006, 2007, 2008.

     

    Evaluation assignments

    Member of international expert panels

    • Member of Expert Panel W&T9 Science and Technology of Constructions and the Built Environment, FWO- Fonds voor Wetenschappelijk Onderzoek - Vlaanderen, Belgium, two assessor meetings per year, 6 years, 2012-2017
    • Member of Expert Panel International Collaboration, FWO - Fonds voor Wetenschappelijk Onderzoek - Vlaanderen, Belgium, two assessor meetings per year, 6 years, 2012-2017

     

    Assessor of academic positions

    • Expert assessor for evaluating two applicants for a Lecturer position at Luleå University of Technology, Sweden, 2018
    • Expert assessor for evaluating eight applicants for a Professor/ Associate Professor/ lecturer position in quality management/lean at Bergen University College, Norway, 2013
    • Expert assessor for evaluating a Lecturer for Associate Professor (Docent) position at Luleå University of Technology, Sweden, 2013
    • Expert assessor for evaluating two Lecturers for Associate Professor (Docent) positions in Operations and Maintenance at Luleå University of Technology, Sweden, 2012
    • Expert assessor for evaluating one applicant for a Senior Lecturer position in Operation and Maintenance at Luleå University of Technology, Luleå, Sweden, 2012
    • Expert assessor for evaluating a Lecturer for Associate Professor (Docent) position at Luleå University of Technology, Sweden, 2011
    • Expert assessor for evaluating one applicant for a PostDoc position in Offshore Wind Turbines at University of Stavanger, Norway, 2010.
    • Expert assessor for evaluating one applicant for a Adjunct lecturer position in Maintenance at Luleå University of Technology, Luleå, Sweden, 2010
    • Expert assessor for evaluating one applicant for a Professor position in Maintenance at Luleå University of Technology, Luleå, Sweden, 2010
    • Expert assessor for evaluating two applicants for a Professor/ Associate Professor position in Safety at Stord/ Haugesund University College, Norway, 2010
    • Expert assessor for evaluating a Professor of mechanical engineering for qualification as a Professor in design for operations and maintenance at Luleå University of Technology, Sweden, 2009
    • Expert assessor for evaluating a Lecturer for Associate Professor (Docent) position at Luleå University of Technology, Sweden, 2009
    • Expert assessor for evaluating Lecturer for Associate Lecturer position at Tromsø University College, 2008
    • Expert assessor for evaluation of applicant for Lecturer position at Växjö University, Sweden.2007
    • Expert assessor for evaluation of applicant for an Associate Professor and a Lecturer position at Luleå University of Technology, Sweden, 2006
    • Expert assessor for evaluation of applicants for PhD research position at Tromsø University College (now University of Tromsø), 2007, 2008
    • Expert assessor for evaluation of applicants for PhD research position at UiS: 2004, 2005, 2006 (2),  2007, 2008, 2009, 2012, 2013

     

    Research Assessor

    • Member of Expert Panel W&T9 Science and Technology of Constructions and the Built Environment, FWO- Fonds voor Wetenschappelijk Onderzoek - Vlaanderen, Belgium, two assessor meetings per year, 6 years, 2012-2017, Assessed 8-12 research applications per meetings
    • Member of Expert Panel International Collaboration, FWO - Fonds voor Wetenschappelijk Onderzoek - Vlaanderen, Belgium, two assessor meetings per year, 6 years, 2012-2017, Assessed 8-12 research applications per meetings
    • Expert assessor for evaluation of one research proposals for King Fahd University of Petroleum and Minerals, Saudi Arabia, 2011
    • Expert assessor for evaluation of four research proposals for Linne University, Sweden, 2011
    • Expert assessor for evaluation of two research proposals for Linne University, Sweden, 2010

     

    Membership

    Member of the Norwegian Academy of Technological Sciences and Academy of Science in Stavanger, 2012-present.

     

    Publications


    Papers in international peer reviewed journals

    1. Kusumawardhani, M., Kumar, R and Markeset, T (2019), Establishing operational readiness and assurance for petroleum project, Accepted for publication in Journal of Quality in Maintenance Engineering 
    2. Ramrattan, H., Markeset, T. and Syan, C.S. (2019), Sustaining Asset Integrity in the Trinidad and Tobago’s Energy Sector: An Assessment, West Indian Journal of Engineering, ISSN 0511-5728, Vol.42, No.1, July 2019, pp.12-21
    3. Kusumawardhani, M., Gundersen, S. and Markeset, T (2017). Mapping the research approach of asset management studies in the petroleum industry, Journal of Quality in Maintenance Engineering, Vol 23, Issue 1, pp. 57-70, doi: 10.1108/JQME-07-2015-0031
    4. Kusumawardhani, M., Kumar, R and Markeset, T (2016), Development of strategic asset integrity planning in the petroleum industry, Journal of Quality in Maintenance Engineering, Vol. 23 Issue: 2, pp.165-179, doi: 10.1108/JQME-04-2016-0016
    5. Kusumawardhani, M., Kumar, R and Markeset, T (2016), Asset integrity management: offshore installations challenges, Journal of Quality in Maintenance Engineering, Volume 22 Issue 3, pp. 238 - 251, doi: 10.1108/JQME-06-2015-0023, (Highly commended paper for the Outstanding Paper award, in the 2017 Emerald Literati Network Awards for Excellence), http://www.emeraldgrouppublishing.com/authors/literati/awards.htm?year=2017&journal=jqme 
    6. Gudmestad, O.T. and Markeset, T. (2015), Oil and gas operations under extreme conditions in the cold north, International Journal of Computational Methods and Experimental Measurements, Volume 3, Issue 1, WIT Press, Southampton
    7. Kusumawardhani, M, and Markeset, T (2015 ), Asset integrity knowledge management: a case study from the petroleum industry, Operations and Supply Chain Management: An International Journal, Vol 8, Issue 3, pp 146-153
    8. Uyiomendo, E.E. and Markeset, T. (2015), Subsea maintenance service delivery: a multi-variable analysis model for predicting potential delays in scheduled services, Journal of Quality in Maintenance Engineering, Vol 21, Issue 1, pp. 34-54 (winner of the Outstanding Paper award in the 2016 Emerald Literati Network Awards for Excellence, http://www.emeraldgrouppublishing.com/authors/literati/awards.htm?year=2016)
    9. Markeset, T, Sæland, A.C., Gudmestad, O.T. and Barabady, J. (2015), [Book Chapter] Petroleum production facilities in Arctic operational environments, In: Bourmistrov, A., Mellemvik, F., Bambulyak, A., Gudmestad, O. T., Overland, I., Zolotukhin, A. (Eds.), International Cooperation and Arctic Petroleum: Barents Sea Scenarios
    10. Singh, M. and Markeset, T. (2014), Handling of variability in probabilistic and possibilistic failure analysis of corroded pipes, DOI 10.1007/s13198-013-0197-y, International Journal of System Assurance Engineering and Management, ISSN 0975-6809, Vol 5, Issue 4, pp. 503-512
    11. Singh, M. and Markeset, T. (2014), Hybrid models for handling of variability and uncertainty in probabilistic and possibilistic failure analysis of corroded pipes, Engineering Failure Analysis, Engineering Failure Analysis, Available online April 13, http://dx.doi.org/10.1016/j.engfailanal.2014.04.008
    12. Barabadi, A., Barabady, J. and Markeset, T. (2014), Application of reliability models with covariates in spare part prediction and optimization - A case study, Reliability Engineering & System Safety, Volume 123, March 2014, Pages 1-7, http://dx.doi.org/10.1016/j.ress.2013.09.012 
    13. Singh, M., Markeset, T. and Kumar, U. (2013), Some philosophical issues in modeling corrosion of oil and gas pipelines, DOI 10.1007/s13198-013-0192-3, International Journal of System Assurance Engineering and Management, ISSN 0975-6809, Vol 5, Issue 1, pp 55-74
    14. Singh, M. and Markeset, T. (2013), Simultaneous handling of variability and uncertainty in probabilistic and possibilistic failure analysis of corroded pipes, DOI 10.1007/s13198-013-0202-5, International Journal of Systems Assurance Engineering and Management, ISSN 0975-6809, Vol 5, Issue 1, pp 43-54
    15. Markeset, T., Moreno-Trejo, J., Kumar, R. (2013), Maintenance of Subsea Petroleum Production Systems: A Case Study, Journal of Quality in Maintenance Engineering, DOI 10.1108/13552511311315940, Vol. 19 No. 2, pp. 128-143
    16. Moreno-Trejo, J., Kumar, R. and Markeset, T. (2012), Mapping Factors Influencing the Selection of Subsea Petroleum Production Systems – A Case Study, International Journal of System Assurance Engineering  and Management, DOI 10.1007/s13198-012-0090-0, Vol. 3, Issue 1, pp. 6-16
    17. Moreno-Trejo, J., Kumar, R. and Markeset, T. (2012), System Assurance of Subsea Petroleum Production Systems: A Case Study Mapping Factors Influencing the Sourcing Strategy, International Journal of Systems Assurance Engineering and Management, DOI: 10.1007/s13198-012-0108-7, Vol. 3, Issue 3, pp. 255-265
    18. Moreno-Trejo, J., Kumar, R., Markeset, T. (2012), Factors Influencing the Installation and Maintenance of Subsea Petroleum Production Equipment: A Case Study, Journal of Quality in Maintenance Engineering, Vol 18, Issue 4, pp. 454 - 471
    19. Ratnayake, C. and Markeset, T. (2012), Asset Integrity Management Towards Sustainable Performance, MaintWorld, No. 1, pp. 18-22
    20. Kumar, R., Barabady, J., Markeset, T. and Kumar, U. (2012), Improving Maintainability in Extreme Cold Climatic Conditions, International Journal of Performability Engineering, Vol. 8, No. 5, September, pp. 563-572
    21. Samarkoon, S.M.K., Markeset, T. and Gudmestad, O.T. (2012), Life Cycle Costing as a Tool for Selecting the Best Available and Qualified Technique for Managing Physical Assets, International Journal of Performability Engineering, Vol 8, No 3, May 2012, pp. 249-264
    22. Ratnayake, R.M.C. and Markeset, T. (2012), Asset Integrity Management for Sustainable Industrial Operations: Measuring the Performance, International Journal of Sustainable Engineering, DOI:10.1080/19397038.2011.581391, Volume 5, Issue 2, pp. 145-158
    23. Barabadi, A. and Markeset, T. (2011), Reliability and Maintainability Performance under Arctic Conditions, International Journal of System Assurance Engineering and Management, DOI 10.1007/s13198-011-0071-8, September, Volume 2, Issue 3, pp 205-217
    24. Barabadi, A., Barabady, J. and Markeset, T. (2011), A Methodology for Throughput Capacity Analysis of a Production Facility Considering Environment Condition, Reliability Engineering & System Safety, Vol. 96, Issue 12, pp. 1637-1646.
    25. Barabadi, A., Barabady, J. and Markeset, T. (2011), Maintainability Analysis Considering Time-Dependent and Time-Independent Covariates, Reliability Engineering & System Safety, Vol. 96, Issue 1, January, pp. 210-217
    26. Kayrbekova, D., Barabady, A. and Markeset, T. (2011), Maintenance Cost Evaluation and Uncertainty Analysis using Monte Carlo Simulation for a System to be Used in the Arctic Region, Journal of Quality in Maintenance Engineering, Vol. 17, No. 4, pp. 320-336
    27. Kayrbekova, D., Ghodrati, B. and Markeset, T. (2011), Activity-Based Life-Cycle Costing as an Alternative to Conventional LCC in Engineering Design, In: International Journal of System Assurance Engineering and Management, Vol. 2 No 2.
    28. Ghodrati, B., Markeset, T. and Ahmadi, A. (2011), Enhancement of Mining Machineries Performance through Supportability, International Journal of COMADEM, Vol. 14, No. 2, pp. 35-43
    29. Barabady, J., Markeset, T. and Kumar, U. (2010), Review and Discussion of Production Assurance Programs, International Journal of Quality and Reliability Management, Vol. 27, Issue 6, pp 702-720.
    30. Gao, X., Barabady, J. and Tore Markeset, T. (2010), An Approach for Prediction of Petroleum Production Facility Performance Considering Arctic Influence Factors, Reliability Engineering & System Safety, Volume 95, Issue 8, pp. 837-846.
    31. Uyiomendo, E.E. and Markeset, T. (2010), Subsea Maintenance Service Delivery: Mapping Factors Influencing Scheduled Service Duration, Special Section on Maintenance and Safety Management in Process Plants, International Journal of Automation and Computing (IJAC), Vol. 7 No. 2, pp. 167-172.
    32. Ratnayake, R.M.C. and Markeset, T. (2010), Technical Integrity Management: Measuring HSE Awareness Using AHP in Selecting a Maintenance Strategy, Journal of Quality in Maintenance Engineering, Vol. 16, No. 1.
    33. Ratnayake, R.M.C. and Markeset, T. (2010), Implementing Company Policies in Plant Level Asset Operations: Measuring Organizational Alignment, European Journal of Industrial Engineering, Vol. 4, No. 3. pp. 355-371
    34. Barabady, J., Markeset, T. and Kumar, U. (2010), A Framework for Improvement of Production Plant Performance using Production Assurance Programs, International Journal of Systems Assurance Engineering and Management, Vol. 1, No 1, pp. 59-65.
    35. Gao, X., Barabady, J. and Tore Markeset, T. (2010), Criticality Analysis of a Production Facility using Cost Importance Measures, International Journal of Systems Assurance Engineering and Management, Vol 1, No 1, pp. 17-23.
    36. Singh, M. and Markeset, T. (2009), A Methodology for Risk-based Inspection Planning of Oil and Gas Pipes Based on Fuzzy Logic Framework, Engineering Failure Analysis, Vol. 16, pp. 2098-2113
    37. Kumar, R., Panesar, S.S. and Markeset, T. (2009), Development of Technical Integrity Management Services – A Concept, Journal of Quality in Maintenance Engineering, Vol. 15, No. 3
    38. Markeset, T. and Kumar, U. (2009), Editorial – Special issue: “Developments in Industrial B2B Services”, International Journal of Services Technology and Management, Vol 11, No 1
    39. Panesar, S.S. and Markeset, T. (2009), Industrial Service Innovation Process: Influencing Factors – A Case Study, International Journal of Services Technology and Management, Vol 11, No 1, pp. 82-102
    40. Markeset, T. (2008), Design for High Performance Assurance for Offshore Production Facilities in Remote Harsh and Sensitive Environment, Quarterly Journal of the Operational Research Society of India, OPSEARCH, Vol.45, No.3, September, pp. 275-290
    41. Gao, X., Markeset, T. and Barabady, J. (2008), Design and Operational Maintainability Importance Measure: A Case Study, Quarterly Journal of the Operational Research Society of India, OPSEARCH Vol. 45, No. 3, September, pp. 189-208
    42. Panesar, S.S. and Markeset, T. (2008), Industrial Service Innovation Through Improved Contractual Relationships: A Case Study, Journal of Quality in Maintenance Engineering, Volume 14 Issue 3
    43. Panesar, S.S., Markeset, T., and Kumar, R. (2008), Industrial Service Innovation Growth and Barriers, International Journal of Services Technology and Management, Vol. 9, No 2, pp. 174-193
    44. Panesar, S.S. and Markeset, T. (2008), Development of a Framework for Industrial Service Innovation Management and Coordination, Journal of Quality in Maintenance Engineering, Vol. 14, No. 2, pp. 177-193
    45. Kumar, R. and Markeset, T. (2007), Development of Performance-Based Service Strategies for the O&G Industry: A Case Study, Journal of Business and Industrial Marketing, Vol. 22, Issue 4
    46. Kumar, R., Markeset, T. and Kumar, U. (2006), Implementation and Execution of Industrial Service Strategy: A Case Study from the Oil and Gas Industry, Journal of Quality in Maintenance Engineering, Vol. 12, No. 2
    47. Markeset, T. and Kumar, U. (2005), Study of Product Support Strategy: Conventional versus Functional Products, Journal of Quality in Maintenance Engineering, Vol. 11, No. 1
    48. Kumar, R., Markeset, T. and Kumar, U. (2004), Maintenance of Machinery: Negotiating Service Contracts in Business-to-Business Marketing, International Journal of Service Industry Management, Vol. 15, No. 4
    49. Markeset, T. and Kumar, U. (2003), Design and Development of Product Support and Maintenance Concepts for Industrial Systems, Journal of Quality in Maintenance Engineering, Vol. 9, No. 4.
    50. Markeset, T. and Kumar, U. (2003), Integration of RAMS and Risk Analysis in Product Design and Development Work Processes: A Case Study, Journal of Quality in Maintenance Engineering, Vol. 9, No. 4. 
    51. Firoozabadi, A., Markeset, T. and Dindoruk, B. (1997), Viscous Crossflow in Fractured Porous Media, Journal of Canadian Petroleum Technology, October, Volume 36, No 9 50-62
    52. Firoozabadi, A. and Markeset, T. (1995), Laboratory Studies in Fractured Porous Media: Part I - Reinfiltration for Gas Liquid Systems, IN SITU, 19 (1), 1-21, February
    53. Firoozabadi, A. and Markeset, T. (1995), Laboratory Studies in Fractured Porous Media: Part II - Capillary Crossflow, IN SITU, 19 (1), 23-39, February.
    54. Firoozabadi, A. and Markeset, T. (1994), Fracture-Liquid Transmissibility in Fractured Porous Media, SPE Reservoir Engineering Journal, August. 

     

    Papers in international conference proceedings with referee

    1. Peng, G. And Markeset, T (2018), Dynamic Maintenance Scheduling based on Cost Analysis and Genetic Algorithm for Offshore Facilities, In: The proceedings of The World Congress on Engineering Asset Management, paper presented at the WCEAM2018 conference, 24-26th of September, Stavanger, Norway
    2. Peng, G, Ai, S, Zhang, L, Rong, C and Markeset, T (2018), Equipment Life-cycle Management based on Private Blockchain and Smart Contract, In: The proceedings of The World Congress on Engineering Asset Management, paper presented at the WCEAM2018 conference, 24-26th of September, Stavanger, Norway
    3. Barabady, J, Gao, X, and Markeset, T (2017), Criticality analysis from maintainability point of view, In: The proceedings of the IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Dec, 10-13th, Singapore
    4. Bang, K.E. and Markeset, T. (2016), The Oncoming Waves of Competition, In: The 5th World Conference on Production and Operations Management (P&OM2016), Sept 6-10, Havana, Cuba
    5. Bang, K.E. and Markeset, T. (2016), Towards a New Type of Company: Changes in Company Assets and Core Activities and in Asset Management, In: The 5th World Conference on Production and Operations Management (P&OM2016), Sept 6-10, Havana, Cuba
    6. Bang, K.E. and Markeset, T. (2016), Measuring Changes in Outsourcing: A Case Study, In: The 5th World Conference on Production and Operations Management (P&OM2016), Sept 6-10, Havana, Cuba
    7. Balindres, AR, Kumar, R and Markeset, T (2016), Effects of Arctic Conditions on Human Performance, In: The Proceedings of the 7th International Conference on Applied Human Factors and Ergonomics  (AHFE2016), 27-31 July, Orlando, Florida, USA
    8. Kumar, R, Töres, T and Markeset, T (2016), Comparing Psychosocial Factors Associated with Job Stress among Administrative Staff and Cleaners, In: The Proceedings of the 7th International Conference on Applied Human Factors and Ergonomics (AHFE2016), 27-31 July, Orlando, Florida, USA
    9. Kusumawardhani, A. and Markeset, T. (2015), Asset integrity of deepwater petroleum production facilities, In: The Proceedings of The IEEE International Conference on Industrial Engineering and Engineering Management (IEEM2014), December 09-12th, Selangor, Malaysia
    10. Lokko, N.N.B., Raza, J., Markeset, T. and Panesar, S.S. (2014), Practical challenges in determining periodic maintenance intervals on the Norwegian Continental Shelf (NCS): Some expert views and opinions, In: The proceedings of The Maintenance Performance Measurement and Management Conference (MPMM2014), September 4-5th, Coimbra, Portugal, ISBN: 978-972-8954-42-0, DOI: http://dx.doi.org/10.14195/978-972-8954-42-0 
    11. Lokko, N.N.B., Raza, J., Markeset, T. and Panesar, S.S. (2014),Exploring the condition-based maintenance opportunities for production-critical assets, In: The proceedings of The Maintenance Performance Measurement and Management Conference (MPMM2014), October Coimbra, Portugal, ISBN: 978-972-8954-42-0, DOI: http://dx.doi.org/10.14195/978-972-8954-42-0  
    12. Kusumawardhani, A. and Markeset, T. (2014), Sourcing strategy for asset management support services of petroleum production facilities, To appear In: The Proceedings of The 6th International Conference on Operations and Supply Chain Management (OSCM2014), December 10-12th, Bali, Indonesia
    13. Kusumawardhani, A. and Markeset, T. (2014), Research design for industrial service studies, To appear In: The Proceedings of The 6th International Conference on Operations and Supply Chain Management (OSCM2014), December 10-12th, Bali, Indonesia
    14. Kusumawardhani, A. and Markeset, T. (2014), Information system challenges in managing asset integrity of  petroleum production facilities, To appear In: The Proceedings of The 6th International Conference on Operations and Supply Chain Management (OSCM2014), December 10-12th, Bali, Indonesia
    15. Moreno-Trejo, J. and Markeset, T. (2014), Power Distribution in Subsea Developments: a System Engineering Perspective, To appear in:  The Proceedings of the 2014 SPE Russian Oil & Gas Exploration and Production Technical Conference and Exhibition, 14-16 October, Moscow, Russia
    16. Ayele, Y.Z., Barabadi, A. and Markeset, T. (2013). Spare Part Transportation Management in High North, In: The Proceedings for the 22nd International Conference on Port and Ocean Engineering under Arctic Conditions (POAC2013), June 9-13th, Espoo, Finland
    17. Moreno-Trejo, J., Heras, E. and Markeset, T. (2013), Using HAZOP Analysis in the Maintenance, Modifications and Installation of Subsea Petroleum Production Systems, In: The Proceedings of the Annual Reliability and Maintainability Symposium (RAMS2013), DOI: 10.1109/RAMS.2013.6517771, Jan 28-31st, Orlando, Florida, USA
    18. Ang, H., Markeset, T. and Bang-Steinsvik, T.O. (2013), Condition Monitoring and Identification of Failure Modes of Subsea Electrical Equipment, In: The Proceedings of the Annual Reliability and Maintainability Symposium (RAMS2013), DOI: 10.1109/RAMS.2013.6517634, Jan 28-31st, Orlando, Florida, USA
    19. Ang, H., Markeset, T. and Bang-Steinsvik, T.O. (2012), Condition Monitoring of Oil and Gas Subsea Electrical Equipment - a Case Study of Åsgard Subsea Compression Project, In: The Proceedings of the 2nd International Workshop and Congress on eMaintenance (eMaintenance 2012), pp. 89-94, Dec 12-14th, Luleå, Sweden
    20. Barabadi, A., Ghodrati, B., Barabady, J. and Markeset, T. (2012), Reliability and Spare Parts Estimation Considering Operational Environments - A Case Study, In: The Proceedings of IEEE International Conference on Industrial Engineering and Engineering Management (IEEM2012), December 10-13th, Hong Kong, China
    21. Bencomo, A. and Markeset, T. (2012), Asset management challenges of offshore installations in Arctic regions, In: The Proceedings of the 31st International Conference on Ocean, Offshore and Arctic Engineering, OMAE2012, June 10-15th, Paper No: OMAE2012-83252, Rio de Janeiro, Brazil
    22. Kayrbekova, D., Panesar, S.S. and Markeset, T. (2012), Identification of Factors Causing Time and Cost Overruns in Offshore Petroleum Modification Projects, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
    23. Bang, K. E. and Markeset, T. (2012), Identifying the Drivers of Economic Globalization and the Effects on Companies’ Competitive Situation, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at APMS2011, September 26th-28th, 2011, Stavanger, Norway  
    24. Bang, K. E. and Markeset, T. (2012), Impact of Globalization on Model of Competition and Companies’ Competitive Situation, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at APMS2011, September 26th-28th, 2011, Stavanger, Norway
    25. Homlong, E., Kayrbekova, D., Panesar, S.S. and Markeset, T. (2012), Assessing Maintenance Time, Cost and Uncertainty for Offshore Production Facilities in Arctic Environment, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
    26. Palkar, S., Østgulen, K. and Markeset, T. (2012), Extending the Service Life Span of Ageing Oil and Gas Offshore Production Facilities, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway 
    27. Ravnestad, G., Panesar, S.S., Kayrbekova, D. and Markeset, T. (2012), Improving Periodic Preventive Maintenance Strategies Using Condition Monitoring Data, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
    28. Moreno-Trejo, J. and Markeset, T. (2012), Identifying Challenges in the Development of Subsea Petroleum Production Systems, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
    29. Moreno-Trejo, J. and Markeset, T. (2012), Mapping Factors Influencing the Selection of Subsea Petroleum Production Systems, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
    30. Moreno-Trejo, J. and Markeset, T. (2012), Identifying Challenges in the Maintenance of Subsea Petroleum Production Systems, In: The Proceedings of the International Conference on Advances in Production Management Systems (APMS2011), Paper presented at  APMS2011, September 26th-28th, 2011, Stavanger, Norway
    31. Kayrbekova, D. and Markeset, T. (2011), Non-Conventional Cost Methods in Engineering Decision-Making in Equipment Selection Process, In: The Proceedings of the Mine Planning and Equipment Selection Conference (MPES2011), October 12-14th, Almaty, Kazakhstan
    32. Ratnayake, R.M.C., Samarakoon, S.M.S.M.K. and Markeset, T. (2011), Maintenance Integrity: Managing Flange Inspections on Aging Offshore Production Facilities, In: Proceedings of the ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2011), June 19-24th, Rotterdam, The Netherlands
    33. Barabadi, A., Barabady, J. and Markeset, T. (2011), Uncertainty Analysis of System Reliability Assessment under Arctic Conditions, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    34. Barabadi, A., Hatami, M., Aliyari, M., Barabady, J. and Markeset, T. (2011), Reliability Analysis of an Electrical Power Distribution System Considering the Operational Environment: A Case Study, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    35. Gusfre, D. and Markeset, T. (2011), Integrating Condition Based Maintenance in Existing Preventive Maintenance Programs in the Norwegian Oil and Gas Industry, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    36. Homlong, E., Panesar, S.S., Kumar, R. and Markeset, T. (2011), Influence of Arctic Environment on Reliability, Availability, Maintainability and Supportability, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    37. Kumar, R., Markeset, T., Barabady, J. and Kumar, U. (2011), Ergonomic Issues at a Railway Maintenance Workshop, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    38. Ratnayake, R.M.C. and Markeset, T. (2011), Review of Current Trends in Asset Integrity Management, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    39. Shao, H., Panesar, S.S., Kumar, R. and Markeset, T. (2011), A Risk-based Method to Quantify the Contribution of Maintenance Activities in the Offshore Petroleum Industry, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    40. Sørensen, M., Barabady, J. and Markeset, T. (2011), Identification of Preventive Maintenance Intervals without the Use of Specialists: A Case Study, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway 
    41. Inegbedion, E.E., Trejo, J.M. and Markeset, T. (2011), Industrial Services in the Nigerian National Petroleum Corporation (NNPC), In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    42. Kale, P.B., Bang, K.E., Markeset, T. (2011), Impact of Globalization on the Norwegian Oil Service Industry Segments, In: The Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Management (COMADEM2011), May 30th -June 1st, Stavanger, Norway 
    43. Markeset, T. (2011), Developments of Industrial Services: A Review of Current Research in Norway, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2011), ISBN 0-9541307-2-3, May 30-June 1st, Stavanger, Norway
    44. Barabadi, A., Barabady, J. and Markeset, T. (2010), Application of Accelerated Failure Model for Oil and Gas Industry in Arctic Region, In: The Proceedings of IEEE International Conference on Industrial Engineering and Engineering Management (IEEM2010), December 7-10th, Macau, China
    45. Markeset, T. (2010), Design for Performance: Review of Current Research in Norway, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2010), June 28-July 2nd, Nara, Japan
    46. Kayrbekova, D. and Markeset, T. (2010), Economic Decision Support for Offshore Oil and Gas Production in Arctic Conditions: Identifying the Need, In: The Proceedings of the European Safety and Reliability Conference (ESREL2010), September 5-9th, Rhodes, Greece
    47. Ratnayake, R.M.C. and Markeset, T. (2010), Maintaining Technical Integrity of Petroleum Flowlines on Offshore Installations: A Decision Support System for Inspection Planning, In: Proceedings of the ASME 2010 29th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2010), June 6-11th, Shanghai, China, Paper OMAE2010-20035
    48. Kumar, R., Barabady, J., Markeset, T. and Kumar, U. (2009), Ergonomic and Maintainability Design Issues in Mining, In: The Proceedings of the Mine Planning and Equipment Selection Conference (MPES2009), November 16-19th, 2009, Banff, Alberta, Canada
    49. Barabadi, A., Barabady, J. and Markeset, T. (2009), Management of Production Assurance in Harsh, Remote, and Sensitive Environment, In: The Proceedings of the 20th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC2009), June 9-12th, Luleå, Sweden
    50. Gao, X., Barabady, J. and Markeset, T. (2009), A New Approach for Prediction of Maintainability Considering Arctic Environmental Conditions, In: The Proceedings of the 20th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC2009), June 9-12th, Luleå, Sweden
    51. Kayrbekova, D. and Markeset, T. (2009), Life-Cycle Costing Analysis in Selection of Technical Alternative Solutions for Facilities to be Used in Arctic Locations, In: The Proceedings of the 20th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC2009), June 9-12th, Luleå, Sweden
    52. Kumar, R., Barabady, J. and Markeset, T. (2009), Improvement of Performance of Oil and Gas Production Facility in Arctic by applying Human Factors/ Ergonomic Principles in the Design Phase, In: The Proceedings of the 20th International Conference on Port and Ocean Engineering under Arctic Conditions (POAC2009), June 9-12th, Luleå, Sweden
    53. Singh, M. and Markeset, T. (2009), Structural Analysis of Pipelines Containing Corrosion Defects, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2009), June 9-11th, San Sebastian, Spain
    54. Markeset, T. (2008), Design for Petroleum Production Performance in Arctic Locations Considering Maintenance and Support Services, In: The Proceedings of the Mine Planning and Equipment Selection Conference (MPES2008), October 20-22nd, Beijing, China
    55. Barabady, J., Markeset, T. and Kumar, U. (2008), Overall Production Assurance Effectiveness, In: The Proceedings of the 3rd World Congress on Engineering Asset Management and Intelligent Maintenance Systems (WCEAM-IMS 2008), ISBN 978-1-84882-216-0, Beijing International Convention Center, Oct, 28-30th, Beijing, China, pp 202-206
    56. Panesar, S.S., Kumar, R. and Markeset, T. (2008), Development of Maintenance Strategies for Offshore Production Facilities, In: The Proceedings of the 3rd World Congress on Engineering Asset Management and Intelligent Maintenance Systems (WCEAM-IMS 2008), ISBN 978-1-84882-216-0, Beijing International Convention Center, Oct, 28-30th, Beijing, China, pp 1227-1232
    57. Kayrbekova, D. and Markeset, T. (2008), LCC Analysis in Design of Oil and Gas Production Facilities to be Used in Harsh, Remote and Sensitive Environments, In: The Proceedings of the European Safety and Reliability Conference (ESREL2008), ISBN 978-0-415-48513-5, September 22-25th, Valencia, Spain
    58. Singh, M. and Markeset, T. (2008), Fuzzy Reliability Analysis of Corroded Oil and Gas Pipes, In: The Proceedings of the European Safety and Reliability Conference (ESREL2008), ISBN 978-0-415-48513-5, September 22-25th, Valencia, Spain
    59. Singh, M., Markeset, T. and Kumar, U. (2008), Failure Analysis of Corroded Oil and Gas Pipes Using Fuzzy Logic, In: The Proceedings of the 21st International Congress & Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM2008), June 11-13th, Prague, Czech Republic
    60. Markeset, T., Kumar, R. and Kumar, U. (2007), Remote Operations and Maintenance Support Services: A Conceptual Framework, In: The Proceedings of the Mine Planning and Equipment Selection Conference (MPES2007), December 11-13th, Bangkok, Thailand 
    61. Barabady, J., Markeset, T. and Kumar, U. (2007), Improvement of Production Plant Performance using Production Assurance Programmes, In: The Proceedings of the Swedish Production Symposium (SPS07), August 28-30th, Göteborg, Sweden
    62. Singh, M. and Markeset, T. (2007), Philosophical Aspects of Modeling Corrosion of Oil and Gas Pipelines, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2007), ISBN 978-91-631-8806-0, June 13-15th, Faro, Portugal
    63. Singh, M. and Markeset, T. (2007), Risk Analysis of Oil and Gas Pipelines Subjected to CO2 Corrosion, In: The Proceedings of the European Safety and Reliability Conference (ESREL2007), ISBN 978-0-415-44786-7, June 25-27th, Stavanger, Norway
    64. Panesar, S.S., Kumar, R. and Markeset, T. (2007), Innovation and Contracts in Business-to-Business Services, In: The Proceedings of The 2nd International Conference on Operations and Supply Chain Management (OSCM2007), ISBN: 978-974-677-637-0, May 18-20th, Bangkok, Thailand
    65. Markeset, T., Kumar, R. and Michel, J.E. (2007), Service Delivery Performance Measurement System: A Conceptual Framework, In: The Proceedings of The 2nd International Conference on Operations and Supply Chain Management (OSCM2007), ISBN: 978-974-677-637-0, May 18-20th, Bangkok, Thailand
    66. Gao, X., Markeset, T. and Kumar, U. (2007), A Review of Production Assurance in the Norwegian Petroleum Industry, In: The Proceedings of the Seventh International Conference on Reliability, Maintainability and Safety (ICRMS2007), ISBN 978-7-80144-682-4, August 20-26th, Beijing, China
    67. Gao, X. and Markeset, T. (2007), Design for Production Assurance Considering Influence Factors, In: The Proceedings of the European Safety and Reliability Conference (ESREL2007), ISBN 978-0-415-44786-7, June 25-27th, Stavanger, Norway
    68. Larsen, A. and Markeset, T. (2007), Mapping of Operations, Maintenance and Support Design Factors in Arctic Environments, In: The Proceedings of the European Safety and Reliability Conference (ESREL2007), ISBN 978-0-415-44786-7, June 25-27th, Stavanger, Norway
    69. Panesar, S.S. and Markeset, T. (2006), Maintenance Optimization Process in the Norwegian Petroleum Industry – Key Issues, Challenges, and Opportunities, In: The Proceedings of Condition Monitoring and Diagnostic Engineering Management (COMADEM2006), ISBN 978-91-631-8806-0, June 11-15th, Luleå, Sweden
    70. Panesar, S.S. and Markeset, T. (2006), Trends in Product Support and Service Strategies, In: The Proceeding of EUROMAINTENANCE2006 conference, ISBN 3-9523151-0-9 (old), ISBN 978-3-9523151-01, June 20-22nd, Basel, Switzerland
    71. Kumar, R. and Markeset, T. (2005), RCM as a Tool to Improve Production Performance – Examples from Norwegian Industry, In: The Proceedings of Geominetech Symposium on “New Equipment-New Technology management and Safety” in Mining and Mineral based Industries, May 11-12th, Bhubaneswar, India
    72. Markeset, T. and Kumar, U. (2005), The use of Life Cycle Costs and Profit Assessment to Improve Operations and Supply Chain Management Performance of Complex Oil Production Facilities, In: The Proceedings of The First International Conference on Operations and Supply Chain Management (OSCM2005), ISBN 979-545-039-5, December 15-17th, Bali, Indonesia
    73. Kumar, R., Panesar, S.S. and Markeset, T. (2005), Strategy Development for Industrial Services and Product Support, In: The Proceedings of The First International Conference on Operations and Supply Chain Management (OSCM2005), ISBN 979-545-039-5, December 15-17th, Bali, Indonesia
    74. Panesar, S.S. and Markeset, T. (2005), The role of Industrial Support Service in Operation and Maintenance in the Norwegian Oil and Gas Industry, In: The Proceedings of The First International Conference on Operations and Supply Chain Management (OSCM2005), ISBN 979-545-039-5, December 15-17th, Bali, Indonesia
    75. Markeset, T. and Kumar, R. (2004), Experiences from Implementation of Smart OMS to Enhance Operation and Maintenance Performance in the Norwegian Industry, In: The Proceeding of the International Conference on Intelligent Maintenance Systems (IMS2004), July 15-17th, Arles, France
    76. Markeset, T. and Kumar, U. (2004), Dimensioning of Product Support - Issues, Challenges, and Opportunities, In: The Proceedings of The Annual Reliability and Maintainability Symposium (RAMS2004), ISBN 0-7803-8215-3, ISSN 0149-144X, January 26-29th, Los Angeles, California, USA (Highlights from PhD thesis)
    77. Markeset, T. and Kumar, U. (2003), Integration of RAMS Information in Design Processes – a Case Study, In: The Proceedings of The Annual Reliability and Maintainability Symposium (RAMS2003), ISBN 0-7803-7717-6, ISSN 0149-144X, January 27-31st, Tampa, Florida, USA: 220-225
    78. Markeset, T., Kumar, R. and Kumar, U. (2003), Trends in Product Support and Service Delivery Strategy for Mining Industry, In: The Proceedings of the Geominetech Symposium on New Equipment – New Technology, Management and Safety in Mining and Mineral Based Industries, May 11-12th, Bhubaneswar, India.
    79. Markeset, T. and Kumar, U. (2002), Design and Development of Product Support & Maintenance Concepts for Industrial Systems, In: The Proceedings of the International Foundation for Research in Maintenance: Maintenance Management & Modelling, IFRIMMmmm2002, May 6-8th, Växjö, Sweden.
    80. Markeset, T. and Kumar, U. (2002), Integration of RAMS and Risk Analysis in Product Design & Development Work Processes – A case study, In: The Proceedings of The International Foundation for Research in Maintenance: Maintenance Management & Modelling, IFRIMMmmm2002, May 6-8th, Växjö, Sweden.
    81. Markeset, T. and Kumar, U. (2001), Design and Development of Service and Maintenance Concepts for the Mining Industry, In: The Proceedings of the 10th International Symposium on Mine Planning & Equipment Selection (MPES2001), November 19-21st, New Delhi, India
    82. Markeset, T. and Kumar, U. (2001), R&M and Risk-Analysis Tools in Product Design, to Reduce Life-Cycle Cost and Improve Attractiveness, In: The Proceedings of the Annual Reliability and Maintainability Symposium (RAMS2001), ISBN 0-7803-6615-8, ISSN 0149-144X, Jan 22-25th, Philadelphia, USA: 116-122
    83. Liyanage, J.P., Markeset, T. and Kumar, U. (2001), On the Knowledge Driven Maintenance Performance Management Grounded in Process Intelligence: With Applications to Asset Maintenance and Product Development, In: The Proceedings of the 2nd European Conference on Intelligent Management Systems in Operations (IMSIO-2001), Operational Research Society, July 3-4th, Salford, UK
    84. Liyanage, J.P., Markeset, T., Kørte, J. and Kumar, U. (2001), Value & Risk: A balanced Performance Assessment Criterion for Maintenance in Offshore Engineering Constructions, In: The Proceedings of the 11th International Offshore & Polar Engineering Conference (ISOPE-2001), International Society of Offshore and Polar Engineers (ISOPE2001), June 18-22nd, Stavanger, Norway 
    85. Markeset, T. and Kumar, U. (2000), Application of LCC Techniques in Selection of Mining Equipment and Technology, In: The Proceedings of the 9th International Symposium on Mine Planning and Equipment Selection (MPES2000), Nov 6-9th, Athens, Greece
    86. Firoozabadi, A., Markeset, T. and Wong, T.W. (1996), Gravity Drainage in Layered-Media: Experiments and Analysis, SPE 35720, In: The Proceedings of the Society of Petroleum Engineers (SPE) Western Regional Meeting, May 22nd
    87. Firoozabadi, A. and Markeset, T. (1994), Miscible Displacement in Fractured Porous Media: Part I - Experiments, SPE/DOE 27743, In The proceedings of The 9th SPE/DOE Symposium on Improved Oil Recovery, April 17-20th, Tulsa, Oklahoma, USA
    88. Firoozabadi, A. and Markeset, T. (1992), An Experimental Study of Capillary and Gravity Crossflow in Fractured Porous Media, SPE24918, In: The Proceedings of the 67th Annual Conference and Exhibition of the Society of Petroleum Engineers (SPE), October 4-7th, Washington DC, USA
    89. Firoozabadi, A. and Markeset, T. (1992), An Experimental Study of the Gas-Liquid Transmissibility in Fractured Porous Media, SPE24919, In: The Proceedings of the 67th Annual Conference and Exhibition of the Society of Petroleum Engineers (SPE), October 4-7th, Washington DC, USA

     

    Theses

    • Markeset, T., (2003), Dimensioning of Product Support: Issues, Challenges, and Opportunities, Doctoral Thesis No. 6, University of Stavanger, ISBN 82-7644-197-1, ISSN 1502-3877, http://hdl.handle.net/11250/2412136 
    • Markeset, T. (1991), A Comparison between Hammer Impact Excitation Technique and Pseudo Random Noise Excitation Technique for Performing Experimental Modal Analysis, Master Thesis, University of Minnesota, Part 1: Thesis, Part 2: Figures

     

    Interviews

    Gudmestad, O.T. and Markeset, T., (2012), Norway's Oil Industry Working in Extreme Conditions, interview with Professor Ove Tobias Gudmestad and Professor Tore Markeset at the University of Stavanger (UiS), Stavanger, Norway, journalist K.A. Okstad, translation: R.E. Gooderham, illustration: O.A. Hauge, UiS,
    http://www.sciencedaily.com/releases/2012/11/121123092134.htm, Accessed Nov. 11, 2013

     

    Reports

    • Panesar, S.S. and Markeset, T. (2005), Industrial Services and Innovation Strategies in the Knowledge Intensive Economy: Mapping of Players, Roles, Content, Practices, and Needs, University of Stavanger Report Number 3, The Research Council of Norway Project Number 168175, ISBN 82-7644-285-4, ISSN 0806-7031 
    • Markeset, T. (2002), Project Report – Phase 2: Study of the Design and Manufacturing Process in Company X, PhD - Case study, University of Stavanger, Stavanger, Norway 
    • Markeset, T. (2001), Project Report – Phase 1: Study of the Design and Manufacturing Process in Company X, PhD - Case study, University of Stavanger, Stavanger, Norway 
    • Firoozabadi, A. and Markeset, T. (1991), Project Results and Work in Progress, Report for Reservoir Engineering Research Institute (RERI) (Palo Alto, California, USA) Research Consortium Members and US Department of Energy 
    • Firoozabadi, A. and Markeset, T. (1992), Project Results and Work in Progress, Report for Reservoir Engineering Research Institute (RERI) (Palo Alto, California, USA) Research Consortium Members and US Department of Energy 
    • Firoozabadi, A. and Markeset, T. (1993), Project Results and Work in Progress, Report for Reservoir Engineering Research Institute (RERI) (Palo Alto, California, USA) Research Consortium Members and US Department of Energy 

     

    Invited presentations

    • Markeset, T., (2011), Risikobasert vedlikeholdsstyring (Risk Based Maintenance Management), Invited presentation at Sjøsikkerhetskonferansen (Safety at Sea Conference), Arranged by Sjøfartsdirektoratet (The Norwegian Maritime Directorate), September 28-29, Haugesund, Norway.
    • Markeset, T. (2008), Presentation of project: Design for Operations, Maintenance and Support (OMS) of Complex Production Facilities in Remote, Harsh and Sensitive Environment, CIAM Lunch seminar, In cooperation with Petrolink AS 
    • Kayrbekova, D. and Markeset, T. (2008), Life Cycle Cost Analysis in Operation, Maintenance and Support, CIAM Lunch seminar, In cooperation with Petrolink AS 
    • Markeset, T. (2003), Dimensioning of Product Support: Issues, Challenges, and Opportunities, The Rogaland Maintenance and Asset Management Conference (Drift og Vedlikeholdsdagene i Rogaland, DVR2003), Local Conference, Stavanger, Norway, (Presentation of PhD Thesis) 
    • Markeset, T. (1999), Integration of Reliability, Maintainability and Risk Analysis Methods in Design to Cut Down the Maintenance Cost, Young OR11 Conference, Cambridge, England 
    • Markeset, T. (1993), Project Experimental Results and Work in Progress, Presentations for Reservoir Engineering Research Institute (RERI) (Palo Alto, California, USA) Research Consortium Members 
    • Markeset, T. (1992), Project Experimental Results and Work in Progress, Presentations for Reservoir Engineering Research Institute (RERI) (Palo Alto, California, USA) Research Consortium Members 
    • Markeset, T. (1991), Project Experimental Results and Work in Progress, Presentations for Reservoir Engineering Research Institute (RERI) (Palo Alto, California, USA) Research Consortium Members 

     

    Compendiums

    • Markeset, T. (2010), Operations and Maintenance Management, 5 ECTS, University of Stavanger, Stavanger, Norway 
    • Markeset, T. (2010), Condition Monitoring and Management, 5 ECTS, University of Stavanger, Stavanger, Norway 
    • Markeset, T. (2008), PG430 – Operations of process facilities, 10 ECTS, Tromsø University College, Tromsø, Norway 
    • Markeset, T. and Liyanage, J.P. (2007), Operations and Maintenance, 10 ECTS, University of Stavanger, Stavanger, Norway 
    • Markeset, T. (2006), Industrial Services, 5 ECTS Course, taught at Luleå University of Technology, Sweden 
    • Markeset, T. (2006), Industrial Services, 5 ECTS, University of Stavanger, Stavanger, Norway, (further development of compendium Product Support and Integrated Logistics), 5 ECTS 
    • Markeset, T. (2005), Product Support and Integrated Logistics, 5 ECTS, University of Stavanger, Stavanger, Norway 
    • Kumar, U. Markeset, T. (2003), Introduction to Condition Monitoring, 5 ECTS, University of Stavanger, Stavanger, Norway 
    • Liyanage, J.P. Markeset, T. (2003), Introduction to Operations, Safety, and Maintenance Management, 10 ECTS, University of Stavanger, Stavanger, Norway